help find this KIT!!
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
help find this KIT!!
the C-west kit!! lol, i cant find it anywhere, i dont really wanna pay c-west's retail price, b/c its like over 1,000. so if u can find a replica of the c-west body kit, that is made w/ good material, and a reasonable price, post the link.. appreciate it.
PLEASE buy the authentic one. C-West has worked hard to setup distribution here in the states w/out jacking the prices that they sell for in japan. I got mine from www.kansaimotorsports.com. Only took a couple weeks to get.
goto http://www.c-westusa.com/
Looks like you want: n1 front bumper, side skirt type II, rear bumper. Call kansai motorsports to place your order. Your parts will be shipped directly from c-west in cali. Unfortunately c-west doesn't sell direct, so you need to order via one of their distributers.
Looks like you want: n1 front bumper, side skirt type II, rear bumper. Call kansai motorsports to place your order. Your parts will be shipped directly from c-west in cali. Unfortunately c-west doesn't sell direct, so you need to order via one of their distributers.
Trending Topics
You get what you pay for. $400 and i can assure you that the parts will be low quality, poor fitting, will cost more to install, and will break the first second it hits something (unless you get it reinforced).
No matter. It's your car. If you have the cash you can make it work. Good luck
No matter. It's your car. If you have the cash you can make it work. Good luck
Damn, to late^^^
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
well.. when reality hits u, body kits dont add much aerodynamics.. regardless how u look at it.. its for looks.. any1 knows that.. and plus, my rx-7 is mostly 4 show, weekend car, not a daily driver, wont be going over any speed bumps/ rail road tracks, no dirt roads.. just flat road, cruisin like a rx-7 owner should.. and how can it be cheaper material.. fiberglass is fiberglass, the descriptions say the same thing, 7oz Fb, with a gel coating to finish it off.. i read it everywhere.
well.. when reality hits u, body kits dont add much aerodynamics.. regardless how u look at it.. its for looks.. any1 knows that.. and plus, my rx-7 is mostly 4 show, weekend car, not a daily driver, wont be going over any speed bumps/ rail road tracks, no dirt roads.. just flat road, cruisin like a rx-7 owner should.. and how can it be cheaper material.. fiberglass is fiberglass, the descriptions say the same thing, 7oz Fb, with a gel coating to finish it off.. i read it everywhere.
well.. when reality hits u, body kits dont add much aerodynamics.. regardless how u look at it.. its for looks.. any1 knows that.. and plus, my rx-7 is mostly 4 show, weekend car, not a daily driver, wont be going over any speed bumps/ rail road tracks, no dirt roads.. just flat road, cruisin like a rx-7 owner should.. and how can it be cheaper material.. fiberglass is fiberglass, the descriptions say the same thing, 7oz Fb, with a gel coating to finish it off.. i read it everywhere.
Passenger
Posts: n/a
If the OP bothered to read C-West's website they do actually use wind tunnels so the Type II kit cut lap times because they tested it to make sure it was better.
Cheap ebay copies are made from crap molds, they don't fit, you will pay just as much as the original kit costs in order to get the POS to fit. The original's price is damned good actually, there are just too many cheap people around
Cheap ebay copies are made from crap molds, they don't fit, you will pay just as much as the original kit costs in order to get the POS to fit. The original's price is damned good actually, there are just too many cheap people around
well.. when reality hits u, body kits dont add much aerodynamics.. regardless how u look at it.. its for looks.. any1 knows that.. and plus, my rx-7 is mostly 4 show, weekend car, not a daily driver, wont be going over any speed bumps/ rail road tracks, no dirt roads.. just flat road, cruisin like a rx-7 owner should.. and how can it be cheaper material.. fiberglass is fiberglass, the descriptions say the same thing, 7oz Fb, with a gel coating to finish it off.. i read it everywhere.
"cruisin like a rx-7 owner should"?
I DD my car. Every day since December, and there was snow.
This car is meant to be driven. If you want a show queen then by all means build a show queen with a fake copy of a name brand kit. You're not going to get urethane or FRP for less than $500 so you better put some money aside for cracks and paint.
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
the rx-7 was meant to be daily driven, HAHAHA, thats the funniest thing i've seen all day, thanks 4 the laugh.. wow.. big deal if its a knock off version, just as long as its a good kit, honestly, how much is the c-west kit?? the full N1 kit.. FROM C-WEST.

I remember thumbing through a Motor Trend mag with an advertisement picturing a Porsche in a garage with text that read "Every moment wasted..."
I'm not wasting any time, every drive to work is as fun as your little "cruises". Did you ever get that idle problem fixed?
The authentic c-west kit comes in PFRP, which is NOT just fiberglass.
Pliable Fiber Reinforced Plastic:
This material has similar properties to those of FRP, but is a lot more flexible. The front bumper and Front Half Spoilers made with PFRP are much more difficult to crack due to its flexibility. Side skirts and rear under fins are much more pliable when installing. Depending upon the paint, PFRP aero-parts are much easier to repair, even with damage received while the vehicle is in motion.
--------------------------------------------------------------------------------------------------
good luck!
Pliable Fiber Reinforced Plastic:
This material has similar properties to those of FRP, but is a lot more flexible. The front bumper and Front Half Spoilers made with PFRP are much more difficult to crack due to its flexibility. Side skirts and rear under fins are much more pliable when installing. Depending upon the paint, PFRP aero-parts are much easier to repair, even with damage received while the vehicle is in motion.
--------------------------------------------------------------------------------------------------
good luck!
what a
whats funny is how you find it funny that cars were made to be driven >.>
By all means, go for the paper mashay kit. just dont post a sob story when it gets shredded. for some reason i already picture your car being one of those with endless cracks in the bumper and chipped paint all over the place. have fun!!
Thread Starter
Joined: Apr 2007
Posts: 783
Likes: 1
From: Ft. Worth, TX
rotarich, 6 posts, dont post in my forums, noob.. thanks.. and the rx-7, if u wanna get really technical, was meant to be a drift car. DUH DUH DUH DURRR!@!! rear wheel drive japan tuner?? COME ON!! u wanna get technical, i can sit here all day and listen to u 40 year olds fight w/ me on this, ur not going to win, stick to what u guys know best, american muscle.. rotarich, ur gonna envy my car noob.. were's ur RX-7?? pics?? mmmm... no pics?? ok, SHUSHER!! and again, if ur gonna post non-sense bullshit in my forum, dont post at all, post a website w/ a cheap price, or gtfo.. simple as that.. dont come in here and start flaming everywhere, no1 wants that. PURERX7/NAMASAN has a good post.. they get respect from me.. they're good members of this web site.. there arent many of those.. just b/c u own a RX-7 80% of u think ur GOD!! well guess what, u just got lucky in life.. get the stick outta ur ***.. ur no better than the kid down the street w/ the civic thats 5 different colors.. it all came from the same place.. JAPAN BABY!! JAPAN!! THATS ALL THAT MATTERS!! i dont see why i get flamed on, all i said was, i dont wanna pay 1/4 of wat my car is worth for a body kit, thats just ridiculous, im a guy who has common sense, not some small ***** wannabe w/ money!! all im asking for, is some simple advice on were i can get a decent body kit, for a decent amount of cash.. not that hard to post a website, or give me good advice... THANKS 2 THOSE OF U WHO HAVE LEND A HAND AND TAKEN TIME TO POST A GOOD REPLY!! and im working on the idle problem, i believe i have found the problem, the TPS.. so hopefully later this week, or weekend, ill get to tune it w/ my volt. ill post how it goes.. thanks again 2 the good members of RX7club.com.. *(i'd love to sport this website on my 7, u know, w/ a sick *** sticker, but, for some reason i dont seem to want to put this site on my car)* waste of space?? or just not a good friendly site??? hhhmmmm....



their price for a very well made kit is pretty damn good.