birdrx7tt

does anyone know how to remove the front fender vents? any help would be appreciated. I was told they make aftermarket carbon fiber ones? anyone know were I could find them?

rjuge

HACKSAW! seriously, i think they're bolted in from the inside of the fender.. in other words you have to take the fender off. i think...

djantlive

I think you have to pull the fender liner out to get to it. I think.... Never done it. If it ain't busted, don't mess with it. CF looks gay.

Sharmack

you have to pull the fender off, there is like 3 or 4 small screws that hold them on. The fenders are not that hard to take off, Maybe, 10 or 15 nuts, screws bolts and **** to take off. Remember the one right in front of the door! Fujita Engineering (Osaka Japan) makes a carbon look brake duct that you can get from, or rotary secret 7 or Aerodyne Industries, they cost an arm and a leg like 400 bucks or more, and don't look that hot unless you, have a black FD I.M.H.O.

LT1-7

2 screws behind the fenders. To take the fenders off there are 2 bolts in the front under the bumper cover. And 2 inside the door jam. Then one more under the fender

user 84205

Ya bro, got to take the fender off. The Carbon fiber ducts are (AFLUX) which is made by Fujita Engineering also known as FEED $315.95 shipped, if you are in the states. Maybe cheaper or a little more if you are somewhere else... Like OL`boy say look good on the dark color FD`s unless you already have a lot of Carbon fiber like a hood, then it looks sweet on any color