Headlight conversion question/help
#1
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Arizona
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Headlight conversion question/help
Hello all..
I'm doing a conversion to these headlights on a non RX-7 car and I needed to know what one of the wires went to because they didn't come with a wire diagram or schematic and it is not labeled other than 12V Coil on the little box the wire comes out of. So I really need to know If its a "switched" 12v source or if its a constant like i run it straight to the battery..
Any help would be appreciated..
First photo is the headlights.. And the second photo is me holding the wire i'm confused about that has a 20A fuse in line and a copper round connector
I'm doing a conversion to these headlights on a non RX-7 car and I needed to know what one of the wires went to because they didn't come with a wire diagram or schematic and it is not labeled other than 12V Coil on the little box the wire comes out of. So I really need to know If its a "switched" 12v source or if its a constant like i run it straight to the battery..
Any help would be appreciated..
First photo is the headlights.. And the second photo is me holding the wire i'm confused about that has a 20A fuse in line and a copper round connector
#3
Junior Member
Thread Starter
Join Date: Jul 2008
Location: Arizona
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Thank you. Yeah I had the others just didnt know if that one in the picture was a constant or switched source.. thanks
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM