|
Headlight conversion question/help
2 Attachment(s)
Hello all..
I'm doing a conversion to these headlights on a non RX-7 car and I needed to know what one of the wires went to because they didn't come with a wire diagram or schematic and it is not labeled other than 12V Coil on the little box the wire comes out of. So I really need to know If its a "switched" 12v source or if its a constant like i run it straight to the battery.. Any help would be appreciated.. First photo is the headlights.. And the second photo is me holding the wire i'm confused about that has a 20A fuse in line and a copper round connector Attachment 636314 Attachment 636315 |
The wire you are holding goes to a 12+ source like the battery. It uses the h4 plug to close the relay. The h4 plug consist of two 12v+ inputs one for low and the other is high. The third wire is ground.
|
Originally Posted by turboIIrotary
(Post 11821165)
The wire you are holding goes to a 12+ source like the battery. It uses the h4 plug to close the relay. The h4 plug consist of two 12v+ inputs one for low and the other is high. The third wire is ground.
|
| All times are GMT -5. The time now is 04:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands