Greddy A/F meter
#2
Full Member
Join Date: Sep 2001
Location: San Diego, CA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
60mm do fit...
I fit a 60mm GReddy Boost gauge in the Auto Meter A-Pillar gauge pods. You just need to sand it out a little thats all, it took me 2 mins to go around the inside of the gauge pod with some sandpaper and it fit like a glove. Hope this helps.
#4
Senior Member
Join Date: Feb 2001
Location: Spring Valley, NY
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
i just installed 3 60mm GReddy gauges (A/F was one of em).. make sure you sand or use a dremel and cut down towards the pillar... coz the back of the gauge will hit inside... you'll see what I mean..
#6
NYC's Loudest FD
The Greddy A/F ratio guage is VERY accurate, if you want to make sure its really super accurate you may adjust the guage while using a superwideband A/F meter with the adjustment screw on it, just in case you think it isn't reading accurately. But I know this unit as far as guages goes is probably the most accurate A/F ratio guage next to a real superwideband A/F meter.
Thread
Thread Starter
Forum
Replies
Last Post
edgars95rx7
Link Vi-PEC
0
10-01-15 01:59 PM