Front speaker wiring for a 3rd gen
11-22-01, 07:01 AM
#1
Junior Member
Thread Starter
Join Date: May 2001
Location: Melbourne, Australia
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Front speaker wiring for a 3rd gen
I want to put a set of MB Quart 6.5inch components in my FD. I am planning to put the midrange driver in the stock door locations and I'm still unsure where to put the tweeter. Any suggestions?
The other problem is that I don't know where to run the speaker wiring to the doors. There doesn't seem to be a way.
I suppose I could reuse the stock wiring, but if I was to put the tweeters in the doors I would still need to run extra wires to the door as the crossover will not fit in the door. And then there is the question of would the stock wiring be ok to use if the speakers are powered by a decent amplifier.
Hope someone can help!
The other problem is that I don't know where to run the speaker wiring to the doors. There doesn't seem to be a way.
I suppose I could reuse the stock wiring, but if I was to put the tweeters in the doors I would still need to run extra wires to the door as the crossover will not fit in the door. And then there is the question of would the stock wiring be ok to use if the speakers are powered by a decent amplifier.
Hope someone can help!
