East Bear Light Kit Review
01-04-02, 01:25 PM
#1
Full Member
Thread Starter
Join Date: Feb 2001
Location: San Antonio, TX
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
East Bear Light Kit Review
I recived my East Bear Light Kit from Wayne @ Phase2Motorsports last night, and I must say that he was very easy to deal with and did a good job keeping me informed on the status of my order.
Now on to the review :
It is a very well designed and constructed kit and came with all the nessesary wiring and fasteners. It is a plug 'n play kit it comes with a nice wiring harnes that plugs right into the stock headlight plugs, so no cutting or splicing is needed. The harnes also has a relay that attaches via the supplied connectors to the high beams so the stock lighting controls can activate the high beams.
The only modification for fitment you have to do is drill two holes per side into the metal support that runs behind the bumper. These are for the two screws that hold the front of the light cover (grey gel-coated fiberglass) in place, no other cutting is involved. The lights do sit above the hood line slightly and are quite a bit larger than I expected. These are two pluses in my book since it means a better light pattern.
Overall I'm very impresed with the quality of the kit.
I'll have to get some pics of it this weekend and put them up for everyone to see.
Now on to the review :
It is a very well designed and constructed kit and came with all the nessesary wiring and fasteners. It is a plug 'n play kit it comes with a nice wiring harnes that plugs right into the stock headlight plugs, so no cutting or splicing is needed. The harnes also has a relay that attaches via the supplied connectors to the high beams so the stock lighting controls can activate the high beams.
The only modification for fitment you have to do is drill two holes per side into the metal support that runs behind the bumper. These are for the two screws that hold the front of the light cover (grey gel-coated fiberglass) in place, no other cutting is involved. The lights do sit above the hood line slightly and are quite a bit larger than I expected. These are two pluses in my book since it means a better light pattern.
Overall I'm very impresed with the quality of the kit.
I'll have to get some pics of it this weekend and put them up for everyone to see.
01-06-02, 02:47 AM
#3
TNC
Join Date: Oct 2001
Location: nj
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
01-07-02, 08:31 AM
#4
Full Member
Thread Starter
Join Date: Feb 2001
Location: San Antonio, TX
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
there are some pix of another car posted here:
https://www.rx7club.com/forum/showth...threadid=42899
It was raining this weekend so i was unable to get some pics of the install. Plus my new front end isn't in yet so the car looks a little "rough".
https://www.rx7club.com/forum/showth...threadid=42899
It was raining this weekend so i was unable to get some pics of the install. Plus my new front end isn't in yet so the car looks a little "rough".
Thread
Thread Starter
Forum
Replies
Last Post