DamonB's sub-enclosure, what subs did everyone pick?
#1
DamonB's sub-enclosure, what subs did everyone pick?
hey all... ok, i've got one of damonB's enclosures sitting here unassembled so far, and need to go ahead and pick out a sub for it... any that got this enclosure (i know your all out there!) please share you choice of subs in this box, and what worked out best? thx all..
#2
Full Member
Join Date: Mar 2001
Location: Riverside/Sacramento
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I have a RFP3210(10" Fosgate"). I haven't put together the box yet, but I know It's a little big for the box, so I'm gonna put a one inch extra layer of wood around the hole. The reason I got it is cause it was $54 new. =)
#4
Full Member
Join Date: May 2001
Location: Anchorage Alaska
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by HedgeHog
I'll be putting the Audiomobile EVO 2210 S4 in.
Unless I get cold feet, in which case, I'll be putting the Image Dynamics IDQ10 V.2 D2 in.
I'll be putting the Audiomobile EVO 2210 S4 in.
Unless I get cold feet, in which case, I'll be putting the Image Dynamics IDQ10 V.2 D2 in.
#6
Full Member
Join Date: Sep 2001
Location: Orange County, CA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
i put a 10w0 in mine, and it works fine. It wont win any shows, but it works for me.
here's some pics of my setup
https://www.rx7club.com/forum/showth...threadid=61375
here's some pics of my setup
https://www.rx7club.com/forum/showth...threadid=61375
#7
Rotary Poseur
Join Date: Feb 2001
Location: Richmond, BC, Canada
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Ok...assembled the sub box today. (man, it goes quick with a brad nailer + a circle cutter adapter for a router). The Audiomobile EVO 2210 needs a 9.25" opening to fit. Not to mention the basket frame is 1.5" deep at that opening. So i routered the top and bottom pieces with the circle cutter adapter to that depth. The sub drops right in. However, the overall diameter for the sub is around 10.25" so it sticks past the height of the box.
I'll report how it fits in the car and the sound quality when i get my cables and finish off the install.
Thx, Damon....nice work on the box!
I'll report how it fits in the car and the sound quality when i get my cables and finish off the install.
Thx, Damon....nice work on the box!
Trending Topics
#9
Rotary Poseur
Join Date: Feb 2001
Location: Richmond, BC, Canada
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rjuge
will a jl 10w7 fit in it????
that would be BAD ***
will a jl 10w7 fit in it????
that would be BAD ***
#13
Full Member
iTrader: (1)
Join Date: Mar 2001
Location: Los Angeles
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
What happens if I use a sub with a minimum enclosure size that it slightly larger than the box? These enclosures are 0.75cuft and the sub I'm looking at recommends 0.8 or more. Does this make it not as clear or just limit low-end frequency response?
#15
Persona non grata
Originally posted by newRX7fan
What happens if I use a sub with a minimum enclosure size that it slightly larger than the box? These enclosures are 0.75cuft and the sub I'm looking at recommends 0.8 or more. Does this make it not as clear or just limit low-end frequency response?
What happens if I use a sub with a minimum enclosure size that it slightly larger than the box? These enclosures are 0.75cuft and the sub I'm looking at recommends 0.8 or more. Does this make it not as clear or just limit low-end frequency response?
Thread
Thread Starter
Forum
Replies
Last Post
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM