carbon fiber question.
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 475
Likes: 0
From: San Francisco Bay area
carbon fiber question.
Question. Has anyone covered the interior parts with carbon fiber? I have a touring modle and was thinking of covering the tan parts with CF… I would like to know how to do this.. Hope someone cant help…
Joined: Jun 2002
Posts: 337
Likes: 2
From: cornfield in central Ohio
Senior Member
Joined: Mar 2001
Posts: 350
Likes: 0
From: glen burnie
go to my site
www.carbonfiberparts.net/faq.asp
I have a step by step how to and a list of equipment you will need. If you do try it, start on a piece you don't care about, like a block of wood. I guarantee you first couple of pieces will turn out bad until you get the hang of it. I have been doing it for over a year now and still feel like I am learning with every piece I do. If you have questions about the process just drop me a line.
mark
www.carbonfiberparts.net/faq.asp
I have a step by step how to and a list of equipment you will need. If you do try it, start on a piece you don't care about, like a block of wood. I guarantee you first couple of pieces will turn out bad until you get the hang of it. I have been doing it for over a year now and still feel like I am learning with every piece I do. If you have questions about the process just drop me a line.
mark
I also have experience with carbon fiber and access to a autoclave that can fit a whole rx7 into but you wont need it for interior unless your looking for flawless/strong parts.If you are just doing layover then make sure you get UV resistant epoxy.
PM me if you need help also.
PM me if you need help also.
Thread
Thread Starter
Forum
Replies
Last Post