Anyonne added door speakers to a FC that didn't come with them???
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
The 88+ locations on a FC is actually a pretty good location.
What I did on my old 87 Sport was silicon glue (as a gasket between the metals) and pop rivet an aluminum panel where the speaker is on in the front of the the 89+ doors, cut it out, and mounted a 6 inch there.
I routed the wires through the door harness plug. In hindsight I should have just pulled the door off, when routing the wires through that stock plug; it would have been much easier. The stock door speaker wires were there for the speaker above the arm rest (as found on the 86-88 cars), but I was building a competition system and wanted upgraded wire.
What I did on my old 87 Sport was silicon glue (as a gasket between the metals) and pop rivet an aluminum panel where the speaker is on in the front of the the 89+ doors, cut it out, and mounted a 6 inch there.
I routed the wires through the door harness plug. In hindsight I should have just pulled the door off, when routing the wires through that stock plug; it would have been much easier. The stock door speaker wires were there for the speaker above the arm rest (as found on the 86-88 cars), but I was building a competition system and wanted upgraded wire.
Three spinning triangles
Joined: Apr 2001
Posts: 554
Likes: 0
From: Been all around this world and still call Texas home (Ft Worth)
I made boxes for the front of my door. Mounted the tweets up above the vents and the mids down below. Sounds good if you ask me 
Carpeted it in black since my blue interior is a little on the faded side.
Carpeted it in black since my blue interior is a little on the faded side.
Thread
Thread Starter
Forum
Replies
Last Post