Smitter

ok guys need some help with these 3 things:

1.need help hooking up the horn.

2.can i still hook up my cruise control somehow?

3. how do u get the air bag light to stop blinking?

Smitter

here's a pic of the wiring harness for the wheel but it needs to be removed for installation

Mahjik

iTrader: (1)

You just need to extend the wiring to the horning wiring. What aftermarket hub are you using?


Sure, you'll have to create something to mount the buttons and then do the wires.


https://www.rx7club.com/showpost.php...33&postcount=3

Smitter

its a momo hub. not sure of the part # but i believe it is the only one available for the fd.

do i need to use the wiring harness pictured above then?

Mahjik

iTrader: (1)

It would probably be easier to use the connectors and then do your custom wiring.

Here's some info on other people who retained cruise control with aftermarket wheels:

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/moving-stock-steering-wheel-closer-possible-ideas-501465/

Smitter

ok thx mahjik. i will see what i can do here

money

iTrader: (2)

mahjik is the man. follow it, you will get it done!

Smitter

check this link out for the resistors and tell me if i got the right ones?

http://www.radioshack.com/product/in...entPage=search

Smitter

Mahjik.......where are ya?

Mahjik

iTrader: (1)

I don't know for a fact that it's the "right" resistor. The hub I'm using (Daikei Miata Hub) came with a resistor already wired to remove the airbag light. I would give it a shot and see if it takes care of the problem. It will be an easy test (and resistors are cheap).

Smitter

i'll pick one of these resistors up from the good ol' radio shack and let u know if it works or not