Just seeing if anyone would be interested in these. This is a rough copy as some of the lines still havent been smoothed out yet. But as you can see it takes up minimal trunk space and sits tightly inside the spare tire well and will hold (3) 10" subs with a recessed lip. Enclosure is extremely light due to it being 90% fiberglass. If you interested, let me know.

Sorry my hatch area is such a mess there is a ton of wood glue like **** all over it, it came that way when i got it and I havent cleaned it up yet.

 

another

 

another

 

I would be interested, have you got to hear how they sound yet?

 

well i did a similar enclosure in an eclipse and it sounded great, hit extremely low and hard

 

how much?

 

that would be my next question too.

 

Well I will work with the people interested to set up a price that is fair. Its an entire fiberglass enclosure with the exception of one small side where the terminal connector will be, and the trim rings. What are you guys willing to pay? I can also set this up for (2) 12's, (2) 10's, (2)8's, (3)8's, or (1) 15", (1)12", (1) 10". Just let me know.

 

the other thing to determine the price is whether you want unloaded or loaded boxes. i can get any sub you want, I carry everything from alpine, audiobahn, jl audio, matts, kicker, xtant, powerbase, cutting edge audio, clarion, pioneer, kenwood, mtx, etc. etc. etc. just to give you an idea of what I can get. Im more expensive then ebay but you get a receipt from me as I am an authorized dealer of those products

 

hmmm...let me get back to you, b/c I wouldn't know where to start with in terms of pricing. Let me ask a friend what he thinks they are worth and I will get back to you. I already have the subs ( I can get them at cost) so I will only need the enclosure.

 

anyone else interested?

 

i'd be interested, 2x12"

 

I can do the (2) 12", after measuring it out there can either be two rasied edges (subs slanted down) or one raised edge in the middle subs facing outward and up.

 

one raised sounds best

 

Im also developing other boxes for the fd that will retain the spare tire well, a fiberglass one in the left hand corner of the car angled slightly and a wooden box with partial fiberglass for under the strut bar, but they wont be ready for a while. I was just on the supraforums looking at a stealthbox that nazar is making and he is charging $350 shipped per box, that price is for unloaded enclosures. Is that price fair to all of you because of the labor involved by making these each by hand (NO MASS PRODUCING)

 

I also need to know if you are using you own subs, and ill need a cutout diameter for them, thanks

 

can you make a fiberglass encloser for a 12 for FC where the spare itre would go

oh please...oh please

 

well I would have to get my hand on an fc at least to make a mold of, if there is anyone that wants to loan me there car for a day I'll do it

 

I'd be interested in one 12

 

I think that is a fair price

 

ok, then $350 shipped it is. to those who want sub enclosures I will need payment up front before I work on the project. i can do about one a day because I also work full time. Then I will final sand, so ship date from initial order is about 3 days so expect them in about a week. I need to know what you are planning on putting in these enclosures, so i will need cutout diameter of the sub or subs. Email all orders to teamafx@hotmail.com and I will respond with the paypal id for the payment. I am paypal verified and have a 100% satisfaction feedback. Thanks!

 

$350? Same price on all orders?

 

well the fiberglass materials and time is the same pretty much whether its 1 sub or 3 subs. If we do a flat topped box with the single 12" then I can do it for $300

 

also Im always on aol at night, and on and off during the day my screen name is bassitup01 so drop me a line there if you have questions also

 

bump