1999 stock miata seats in SA 1ST GEN
Thread Starter
lots of potential
Joined: Oct 2007
Posts: 72
Likes: 0
From: Cincinnati,Ohio
1999 stock miata seats in SA 1ST GEN
I'm in the process of finishing up one of the two seats
unfortuantely parents took the camera to myrtle beach with them for a week
so no documentation :"(
but yea its awesome
no welding or fabricating involved(don't have access to a welder or anything like it)
so im using 3inch long bolts all the way through the floor board and put a 6 inch long by 1/8th inch thick peice of steel as a reinforcement for the seats
unfortuantely parents took the camera to myrtle beach with them for a week
so no documentation :"(
but yea its awesome
no welding or fabricating involved(don't have access to a welder or anything like it)
so im using 3inch long bolts all the way through the floor board and put a 6 inch long by 1/8th inch thick peice of steel as a reinforcement for the seats
Thread Starter
lots of potential
Joined: Oct 2007
Posts: 72
Likes: 0
From: Cincinnati,Ohio
I'm in the process of finishing up one of the two seats
unfortuantely parents took the camera to myrtle beach with them for a week
so no documentation :"(
but yea its awesome
no welding or fabricating involved(don't have access to a welder or anything like it)
so im using 3inch long bolts all the way through the floor board and put a 6 inch long by 1/8th inch thick peice of steel as a reinforcement for the seats
unfortuantely parents took the camera to myrtle beach with them for a week
so no documentation :"(
but yea its awesome
no welding or fabricating involved(don't have access to a welder or anything like it)
so im using 3inch long bolts all the way through the floor board and put a 6 inch long by 1/8th inch thick peice of steel as a reinforcement for the seats
now tommorrow for the second one
Thread Starter
lots of potential
Joined: Oct 2007
Posts: 72
Likes: 0
From: Cincinnati,Ohio
well here is the final
VERY bad picture quality seeing as its from me with a rather shaky hand while using a my phone cam so yea
i didn't weld anything
edit: I'm using 1/2 diameter bolts that are drilled through the main floor and being held there with 1/8 thick 6 inch long piece of steel and a lock nut. there's 3 per seat needs to be 4 per seat but i cant get it at such an angle
VERY bad picture quality seeing as its from me with a rather shaky hand while using a my phone cam so yea
i didn't weld anything
edit: I'm using 1/2 diameter bolts that are drilled through the main floor and being held there with 1/8 thick 6 inch long piece of steel and a lock nut. there's 3 per seat needs to be 4 per seat but i cant get it at such an angle
Thread
Thread Starter
Forum
Replies
Last Post
craaaazzy
Comments and Suggestions Archive
3
Aug 21, 2015 02:00 PM
