Interior / Exterior / Audio Talk about interior and exterior mods including audio.

1 in a million chance occurance

Old Apr 4, 2003 | 12:58 PM
  #1  
jasonw3579's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 132
Likes: 0
From: Carrollton, TX
1 in a million chance occurance

okay, i was driving down a street, and turned left at the light, when i was straightening up, i hear a loud pop and for a split second i thought my tire blew... but then i see a whole bunch of brown crap fly up, and i thought it might be coffee in a cup or something, but when i got home, i looked at it and eventually found out that it was some kind of PVC pipe cement. i am currently in the process of trying to get it off and have found that only rubbing alcohol and a lot of fingernail rubbing will get it off, and there's a LOT on it. I need to know if anyone knows anything better to get it off. my friend suggested gasoline, but i'd have to really be careful of the paint.... wash it off right after i put it on, i don't think that'll work too great, any help is appreciated greatly
Reply
Old Apr 4, 2003 | 01:00 PM
  #2  
Amur_'s Avatar
Refined Valley Dude
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 2,283
Likes: 2
From: Kitchener, Ontario (Hamilton's armpit)
That's a new one.


When you get into adhesives, nail polish remover is usually a good bet, except that you may take off your paint along with the goop...
Reply
Old Apr 4, 2003 | 01:04 PM
  #3  
jasonw3579's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 132
Likes: 0
From: Carrollton, TX
yeah, acetone was my first thought... then my first rejection, it may come to that, if i use it ever so carefully
Reply
Old Apr 4, 2003 | 01:29 PM
  #4  
RyosukeTakahashi's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 426
Likes: 0
From: Canada
have you ever tried this stuff called goo gone?? I don't have a bottle with me right now so I don't know if its main ingredient is ascetone, but if your can find some and its not like nail polish remover then buy it cause it works really well.
Reply
Old Apr 4, 2003 | 01:35 PM
  #5  
ponykiller's Avatar
Rotary Enthusiast
Tenured Member 10 Years
 
Joined: Aug 2001
Posts: 819
Likes: 0
From: KC
Goo Gone was also my first thought. It's main ingredient is citrate (citric acid) I believe, so I am sure it is not going to damage paint.
Reply
Old Apr 4, 2003 | 01:43 PM
  #6  
jeremy's Avatar
male stripper
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2001
Posts: 3,126
Likes: 1
From: St Petersburg, FL
goo be gone
Reply
Old Apr 4, 2003 | 02:07 PM
  #7  
nillahcaz's Avatar
you are missed
Tenured Member: 20 Years
iTrader: (2)
 
Joined: Dec 2001
Posts: 987
Likes: 1
From: St. Louis
Goo Gone is some of the best crap out there.
Reply
Old Apr 4, 2003 | 02:12 PM
  #8  
Nick86's Avatar
Yup, still here
Tenured Member: 20 Years
iTrader: (1)
 
Joined: May 2002
Posts: 3,053
Likes: 2
From: Ottawa
Call a body shop, they can probably help you out.

Also, go and buy some plastic scrapers. They are soft enough not to damage your paint, and hard enought to scrape off the adhesive.
Reply
Old Apr 4, 2003 | 02:13 PM
  #9  
Nick86's Avatar
Yup, still here
Tenured Member: 20 Years
iTrader: (1)
 
Joined: May 2002
Posts: 3,053
Likes: 2
From: Ottawa
Nothin lika a double post.

I agree that Goo Gone is a great thing to have.
Reply
Old Apr 4, 2003 | 03:31 PM
  #10  
Mazdabation's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
iTrader: (9)
 
Joined: Sep 2002
Posts: 2,795
Likes: 5
From: Ancaster Ontario, Canada
Goo gone will not harm your paint.
I have used it on all my motorcycles to take off the stickers the factory slaps all over it when brand new.
Reply
Old Apr 4, 2003 | 03:37 PM
  #11  
andy_guerriero's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 34
Likes: 0
From: Casa Grande, AZ
Be really really careful when rubbing, too. A while back someone told me to use a credit card to scrape off one of those retarded dealer decals, which I did....

I put about a thousand micro-fine scratches in my finish, when all was said and done. I curse that fool. It took a lot of time and polishing compound to get that straightened out.
Reply
Old Apr 4, 2003 | 03:46 PM
  #12  
tweaked's Avatar
Rotary Enthusiast
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jul 2001
Posts: 948
Likes: 1
From: Memphis, TN
I have used acetone on paint before. the paint on our cars cures. rub it down with a cloth soaked in acetone, have another clean cloth ready to remove it. when you are done, wash the care really well. and wax it, twice.
If you still don't want to use acetone, go to an autbody paint supply store and buy some Prep-Sol. this stuff is made to remove anything that might make new paint bubble or fish eye, stuff like that. It has no shine properties so you will need to wash and wax again. you might want to go ahead and polish her too. If you hurry and don't let it set in the sun too long O think you can save your paint.
By the way I used to work in an autobody shop
Reply
Old Apr 4, 2003 | 04:06 PM
  #13  
Lisa's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 10
Likes: 0
From: Stockton, CA
Ok, ya'll are gonna think this sounds stupid, but here's what's worked for me to get road tar off:

Aqua Net hair spray. Spray that **** on until it's running, then start wiping (also works to get magic marker off EVERYTHING, including tile, etc.). Have had no problems getting anything off, and didn't damage paint. I've also heard diesel fuel works & won't wreck the paint, but I've not tried it.
Reply
Old Apr 4, 2003 | 10:13 PM
  #14  
robfeltner's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 109
Likes: 0
From: Melbourne, FL
pvs cement remover

I feel for you. I live in Fla and either you have sprinklers or you don't have a lawn. I've worked a lot with pvc the past couple of years. Here's the deal. Go to the hardware store and get a can of pvc pipe cleaner. That is the only thing that will actually disolve the glue. Only thing is that I don't know if it will bite into your paint or not. I suppose you could use it in one hand and then in the other, have a can of WD40 to help neutralize it.

So, buy some, then go to a junk yard and try it on one of their cars.

rob
robfeltner@cfl.rr.com
Reply
Old Apr 5, 2003 | 03:30 AM
  #15  
SerpentineGX's Avatar
Full Member
Tenured Member 10 Years
 
Joined: May 2002
Posts: 136
Likes: 0
From: California
Simple Green and Elbow Greese. Works good for sticker, why not...?
Reply
Old Apr 5, 2003 | 08:00 PM
  #16  
jasonw3579's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 132
Likes: 0
From: Carrollton, TX
well, gasoline, acetone and goo gone work good for the stuff on the body, but not too great on the tire.... but have you ever heard of peanut butter getting gum out of hair? well, it also gets thin layers of PVC pipe cement off of 10th anniversary TII rims soon, it'll be back to normal, thanks for all the input
Reply
Old Apr 6, 2003 | 01:22 AM
  #17  
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 572
Likes: 2
From: LA
=/
Reply
Old Apr 8, 2003 | 04:36 PM
  #18  
Full Member
Tenured Member 05 Years
 
Joined: Apr 2003
Posts: 63
Likes: 0
From: Woonsocket,R.I
Maybe goo gone is the same but, I know that Goop-Off works wonders, and you can find it at Home-Depot, be sure to test in a small area just incase it ruims anything
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GKW
1st Generation Specific (1979-1985)
5
Sep 28, 2015 04:34 PM
WyomingTII
2nd Generation Specific (1986-1992)
12
Sep 28, 2015 10:32 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:27 PM.