Using AEM gauges with a Haltech?
#1
Newbie
Thread Starter
Join Date: May 2021
Location: NJ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Using AEM gauges with a Haltech?
Hello, this is my first time switching to an aftermarket ECU and I知 confused when it comes to gauges. I値l be using a 1500 or 2500, and I want to use an AEM water temp gauge, oil pressure gauge, and boost gauge. My thinking is, how will the ECU read those parameters if that info is only going to the gauges?
#3
Newbie
Thread Starter
Join Date: May 2021
Location: NJ
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I considered using the Haltech IC7, but I do not want to have it sitting in front of the gauge cluster/replace the gauge cluster with it. Seems way too bulky to mount anywhere else.
#4
Rotor or no motor
iTrader: (24)
https://www.haltech.com/product/ht-0...ion-can-gauge/
Thread
Thread Starter
Forum
Replies
Last Post
p00shy
3rd Generation Specific (1993-2002)
10
08-06-13 06:59 PM
RiceRocket
2nd Generation Specific (1986-1992)
2
06-02-02 07:41 PM