Haltech Pulled car out of storage now it misses @ high RPM/load
#1
Rotary Freak
Thread Starter
Join Date: Feb 2001
Location: MN
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
Pulled car out of storage now it misses @ high RPM/load
At first I was thinking it was bad gas so I burnt the tank out and refilled.... still there.
Then I thought maybe it was the old plugs I had in there, got new ones...... still there.
Checked timing and is zeroed.
The only thing I didn't do yet is watch fuel pressure at high rpm/load.
It has never missed before and I'm starting to pull my hair out. Anyone have a idea?? Also how do I tell if it's missing due to a fuel problem or a spark problem?
Thanks in advance
Then I thought maybe it was the old plugs I had in there, got new ones...... still there.
Checked timing and is zeroed.
The only thing I didn't do yet is watch fuel pressure at high rpm/load.
It has never missed before and I'm starting to pull my hair out. Anyone have a idea?? Also how do I tell if it's missing due to a fuel problem or a spark problem?
Thanks in advance
#3
Rotary Freak
Thread Starter
Join Date: Feb 2001
Location: MN
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
I forgot to add it's a bit rich in those areas which to me says it's not a fuel delivery problem.
When I say rich I mean high 10's low 11's @7-11psi. Will that much fuel cause it to miss?
When I say rich I mean high 10's low 11's @7-11psi. Will that much fuel cause it to miss?
#4
Rotary Freak
Thread Starter
Join Date: Feb 2001
Location: MN
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jreynish
get us a datalog of the pertinent information?
I did do a datalog of the event and it all looks pretty good, no uneven rpm points, timing isn't all over the place ect..
#6
Rotary Freak
Thread Starter
Join Date: Feb 2001
Location: MN
Posts: 2,524
Likes: 0
Received 0 Likes
on
0 Posts
looking at Datalog right now... Hmm.. I see a spot where it jumps from 5.040 to 6.020ms but it's at a spot where my boost was hunting a bit so it's hard to say. RPM is a steady climb.
The datalog for my WB shows a huge spike when it misses.
A pull from ~3500 to 7k it might miss 1 or two times.
The datalog for my WB shows a huge spike when it misses.
A pull from ~3500 to 7k it might miss 1 or two times.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
08-13-15 04:55 AM