mjm4jc

Greetings,

I have a 1500.00 budget to purchase an aftermarket EMS for my 84SE. As I read through all the EMS forums, it seems that Haltech is popular and has much support. My SE's engine is stock with an S5 intake. I do plan on street-porting and turbocharging in the future. Since there is hardly any 1st gen owners using Haltechs (for street purposes), I found it difficult to get the answers I was looking for. So, I do have a few questions:

1. The last time I searched, Haltech did not make a plug-n-play harness for the 1st gen. What is involved in modifying an S4/S5 harness to work with mine?

2. To be able to fully convert, what all do I need-----harnesses, sensors, etc? I definitely want to ditch the distributor and AFM. Has anyone here installed a Haltech on an SE?

misterstyx69

iTrader: (142)

get a hold of Chris Ludwig (C Ludwig on forum)Pm him.
Chris is also known as www.lms-efi.com Email him,he answers quick,.
He sells Haltech and can hook you up with anything,anytime..

mjm4jc

Ok, thanks. I still welcome input from anyone who may want to add to this.

j9fd3s

iTrader: (3)

1. can't, the GSL-SE is fuel only. so the ignition and crank angle sensor portion of the harness needs to be custom, as the gsl-se doesn't have anything, unless you want to do fuel only and keep the distributor.

2. lots of people have done it. you need to replace the harness, and add the CAS, coils, map sensor, etc etc

i'd suggest reading the haltech manual, it does actually explain a lot of this

mjm4jc

I didn't see a haltech manual on the forum, just maps, settings, etc.