Haltech Mounting of PS1000 in an FB
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Minnesota
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Mounting of PS1000 in an FB
I am in the process of installing the PS1000 trying to figure out where a good spot is to mount the ECU, relays and fuse box in an FB. I've tried to search and look at many pictures but I have not seen any for my case. The only one i have seen is for an FD. I did read that some people used velcro to mount it in the glove box and will probably cut a hole in the back to feed the harness through. I am at a loss for where to mount the fuse box and relays. I'm just looking for some suggestions from those that have done it already. Any pictures would be very helpful. Thanks!
#3
Full Member
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Minnesota
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Skeese. I have terminated harness and there is plenty of wire in there to place the ECU in the glove box and I was able to mount the relays and fuse box where it is easy access but out of the way.