Haltech Mounting of PS1000 in an FB
10-09-17, 02:56 PM
#1
Full Member
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Minnesota
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Mounting of PS1000 in an FB
I am in the process of installing the PS1000 trying to figure out where a good spot is to mount the ECU, relays and fuse box in an FB. I've tried to search and look at many pictures but I have not seen any for my case. The only one i have seen is for an FD. I did read that some people used velcro to mount it in the glove box and will probably cut a hole in the back to feed the harness through. I am at a loss for where to mount the fuse box and relays. I'm just looking for some suggestions from those that have done it already. Any pictures would be very helpful. Thanks!
10-25-17, 02:01 PM
#3
Full Member
Thread Starter
iTrader: (2)
Join Date: Jan 2006
Location: Minnesota
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Skeese. I have terminated harness and there is plenty of wire in there to place the ECU in the glove box and I was able to mount the relays and fuse box where it is easy access but out of the way.