Haltech ID2000 fitment
#1
Slide or die
Thread Starter
Join Date: Sep 2004
Location: Vallejo, Ca
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
ID2000 fitment
Hello all. I hope I am posting in the correct area. I'm looking for some help on the fitment of these fuel injectors. I recently purchased some Injector Dynamics ID2000 for my secs. It's an 89 T2, I bought them from Real Street performance out of Florida. They came with lower injector cushions and have an o ring at the bottom as well. I can't get them to fit right. Without the cushion the o ring will not seal in the manifold, it's loose. With the cushion the fuel rail is approx 1/2 in away from bolting down to the manifold. Per the part number on the box they are the correct number. Am I missing something? I am also using an S4 T2 fuel rail. And they fit into the rail no problem. Thanks for your input in advance.
#3
Slide or die
Thread Starter
Join Date: Sep 2004
Location: Vallejo, Ca
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
this may help you.. http://fullfunctioneng.com/info/Inje...nt_GuideV1.pdf
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
danielbradley2
3rd Generation Specific (1993-2002)
11
09-28-15 10:44 PM