Haltech Having trouble figuring out the wire up
#1
Concerned Citizen
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Miltown, WI
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Having trouble figuring out the wire up
Hey guys i'm hav'in a little trouble with my wire up here.
-For the sensors, is it the orange wires that are the +5vlts?
- Did you have to extend your battery terminal/ fuel pump/ 12vlts ve+ wires? If so how?
-To wire up the injectors, how does that go. Which wire is for which?
Any info or related web sites would be great.
-For the sensors, is it the orange wires that are the +5vlts?
- Did you have to extend your battery terminal/ fuel pump/ 12vlts ve+ wires? If so how?
-To wire up the injectors, how does that go. Which wire is for which?
Any info or related web sites would be great.
#3
Rotary Freak
Join Date: Nov 2001
Location: trinidad and tobago
Posts: 2,715
Likes: 0
Received 0 Likes
on
0 Posts
IF you are having these problems you should consult the wiring diagrams provided at the back of the HALTECH manual ( keep your money!!) .
TIP - the colours dont always match so you might need to look at the actual positions stamped on the jacks , ie A , B , C , D and so on , but from my experience the colours dont vary much and the labling is vey accurate.
I think the colours would vary depending on if you bought your unit down Australia or in the US.
TIP - the colours dont always match so you might need to look at the actual positions stamped on the jacks , ie A , B , C , D and so on , but from my experience the colours dont vary much and the labling is vey accurate.
I think the colours would vary depending on if you bought your unit down Australia or in the US.
Thread
Thread Starter
Forum
Replies
Last Post
rx7jocke
Suspension/Wheels/Tires/Brakes
72
06-17-16 03:48 AM
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM