KNONFS

iTrader: (14)

Anybody running a HKS Twin Fire on a haltech?


I am not sure if the TF is working, and HKS said that it might not work with a Haltech

crispeed

More details would help but the TF normally works with any haltech.
The TF works in conjunction with the stock igniter so it has nothing to do with the haltech.
TF's are known to go bad so bypass it and check.

KNONFS

iTrader: (14)

Thanks for the info!

To be honest, I don't know if there is a problem, or not. I installed the TP, the car starts just like before the TP; the problem is that the light on the TP does not comes up at all. I've heard stories of TP with a very dim light, but I don't see anything at all.

I called HKS, and they sais that the light will come up during the mid to high rpms. I am starting to hate the HKS unit, as there is no real way of troubleshooting it

So in short,

-Car starts fine with or without the HKS TP
-HKS TP light does not comes up at idle (haven't checked while reving the engine, will do tomorrow)
-The HKS unit has ground, +12V, and a pulsing positive signal from the yellow wires. I don't see a + or - pulse/signal from the white wire (at idle). i should have more info tomorrow.

Thanks again for your help