Haltech E6X not priming fuel pump
#1
E6X not priming fuel pump
I am not getting a ground signal from the O/GY wire for the fuel pump. When I turn the key on, the fuel pump relay clicks, but the pump doesn't prime. I have the other end of that wire going to a 2nd relay near the fuel pump. When I cut that wire, and ground the side that goes to the fuel pump, the pump turns on. I have looked all over in the settings and can not think of anything that would be causing this? Is the ECU bad? Any ideas? Thanks
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM
befarrer
Microtech
3
08-22-15 05:52 PM