Haltech Dataloging EGT to E8
#1
registered user
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Location: San Diego
Posts: 2,469
Likes: 0
Received 0 Likes
on
0 Posts
Dataloging EGT to E8
Has anyone setup an E8 to datalog EGT. I have an idea how to do this, but I'm wanting to know what others have done first. What I am thinking is configuring an input as a wideband 02 off of a 0-5 volt egt sensor to either datalot as something easily readable like .001 lambda per degree from 500 (.500 lambda) to 2000 (2.000 lambda) or converting to something easiliy readable with excel, or with a script.
Any input is desired.
Any input is desired.
#2
Originally Posted by slo
Has anyone setup an E8 to datalog EGT. I have an idea how to do this, but I'm wanting to know what others have done first. What I am thinking is configuring an input as a wideband 02 off of a 0-5 volt egt sensor to either datalot as something easily readable like .001 lambda per degree from 500 (.500 lambda) to 2000 (2.000 lambda) or converting to something easiliy readable with excel, or with a script.
Any input is desired.
Any input is desired.
Haltech allready supports fuel pressure vs volts on an input for datalogging.
#4
EFI Tech Wannabe
iTrader: (1)
Join Date: Sep 2003
Location: D.R., USA, the world...
Posts: 2,405
Likes: 0
Received 4 Likes
on
4 Posts
Originally Posted by slo
Thanks for the feedback, which sensor would you recomend for this?
It looks like the turbo XS or possibly AEM units may provide the required 0-5 volt output.
It looks like the turbo XS or possibly AEM units may provide the required 0-5 volt output.
#5
Originally Posted by Claudio RX-7
Also, the "expensive" version of the Autometer EGT gauge, the one that you buy the gauge with controller box and the thermocouple separate is also an option. The box has the the 0-5v output pin you can send to any of the Haltech's SpareA/D inputs.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM