Haltech Datalog Innovate - Haltech Platinum
04-04-09, 06:04 PM
#1
Datalog Innovate - Haltech Platinum
I have heard about a 5 different ways people have told me how to get these things to work regarding the E6K and its starting to get lost in my head.
I have the Innovate Stand-Alone wideband kit on my car and I want to hook it up to the Platinum to datalog and hopefully to do the O2 correction thing. I already have the innovate set up for 0-5v or whatever haltech uses.
I have two lines from the innovate wideband, both are 0-5v outputs, what do I do with them? Do I need to hook up both of them? Do I hook one/both into a digital input wire and set it up in software?
I have the Innovate Stand-Alone wideband kit on my car and I want to hook it up to the Platinum to datalog and hopefully to do the O2 correction thing. I already have the innovate set up for 0-5v or whatever haltech uses.
I have two lines from the innovate wideband, both are 0-5v outputs, what do I do with them? Do I need to hook up both of them? Do I hook one/both into a digital input wire and set it up in software?
04-04-09, 09:25 PM
#2
Seriously, this has been covered a bunch.
One of the outputs from the Innovate will need to connect to one of the AV inputs of the ECU. Program that input as wideband input. The default input setting of the ECU are 0V=10:1 - 5V=20:1. It's best to change the output of the Innovate to match those settings.
For O2 correction simply enable that option in the setup menu.
One of the outputs from the Innovate will need to connect to one of the AV inputs of the ECU. Program that input as wideband input. The default input setting of the ECU are 0V=10:1 - 5V=20:1. It's best to change the output of the Innovate to match those settings.
For O2 correction simply enable that option in the setup menu.
04-04-09, 09:29 PM
#3
Seriously, this has been covered a bunch.
One of the outputs from the Innovate will need to connect to one of the AV inputs of the ECU. Program that input as wideband input. The default input setting of the ECU are 0V=10:1 - 5V=20:1. It's best to change the output of the Innovate to match those settings.
For O2 correction simply enable that option in the setup menu.
One of the outputs from the Innovate will need to connect to one of the AV inputs of the ECU. Program that input as wideband input. The default input setting of the ECU are 0V=10:1 - 5V=20:1. It's best to change the output of the Innovate to match those settings.
For O2 correction simply enable that option in the setup menu.
I am sure it has, but literally I have had three different people tell me three different ways on multiple Haltech ECU's. It got really annoying.
Its just about install time now!
