Haltech Could someone try this map for me?
#26
Tenseiga
iTrader: (1)
Join Date: Apr 2003
Location: Iowa
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
use a fuel pressure guage to test injectors.
to see if your leak'n turn the car off. It should hold the pressure for a while (like 5 min fsm will say). If it drops fast it's a leaky injector.
I think with a stuck injector the car would rev on it's own to about 3k and cycle up and down. I think i've heard of this happing.
to see if your leak'n turn the car off. It should hold the pressure for a while (like 5 min fsm will say). If it drops fast it's a leaky injector.
I think with a stuck injector the car would rev on it's own to about 3k and cycle up and down. I think i've heard of this happing.
#27
Rotodeus
Thread Starter
iTrader: (2)
Join Date: May 2002
Location: Gresham, OR
Posts: 1,704
Likes: 0
Received 0 Likes
on
0 Posts
I'm wondering if my FPR is bad too actually. It's a Stocker which makes me a little worried with a walbro 255 and a pair of 1600's. at one point I didn't have the FPR hooked up when I tried to start the car and I don't think it was much of an improvement when it got connected.
#29
Usually when the FPR goes bad it doesn't register till you hit boost and the secondaries come on.. hmm interesting info guys, we appreciate all the map testing... we're still troubleshooting via AIM...
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM