Haltech Coils fire with key switch? E6K
#1
Full Member
Thread Starter
Join Date: Jan 2008
Location: idaho
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Coils fire with key switch? E6K
just put in my engine and checking timing i noticed that the coils ignite when the key is switched to the run position? is this normal? what did i do wrong?
also, i couldn't get it to start, I'm thinking it to low fuel MS. went from 550 to 440 cc inj. how much fuel pressure or how many MS should I add to compensate for this change?
using same map as before, changes are 4-port HB with a semi-pp, old was a 6-port hb.
also, i couldn't get it to start, I'm thinking it to low fuel MS. went from 550 to 440 cc inj. how much fuel pressure or how many MS should I add to compensate for this change?
using same map as before, changes are 4-port HB with a semi-pp, old was a 6-port hb.
#6
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,835
Received 2,603 Likes
on
1,847 Posts
i saw my engine actually turn!