Coils fire with key switch? E6K
just put in my engine and checking timing i noticed that the coils ignite when the key is switched to the run position? is this normal? what did i do wrong?
also, i couldn't get it to start, I'm thinking it to low fuel MS. went from 550 to 440 cc inj. how much fuel pressure or how many MS should I add to compensate for this change? using same map as before, changes are 4-port HB with a semi-pp, old was a 6-port hb. |
Im pretty sure thats normal. The Ignition should get power as soon as you turn the key to ON. Same with anything else.
I have a sprint re and I turn the key the plugs always fire once. |
+1. my old e6x did the same
|
the old e6 used on the cbr600 bike engine in a previous FSAE chassis used to blow up plenums doing the same thing. They pulse the outputs on power up.
|
my e6k sometimes blows vacuum caps off when it happens, reallty annoying
|
i saw my engine actually turn!
|
Originally Posted by j9fd3s
(Post 11971307)
i saw my engine actually turn!
|
All times are GMT -5. The time now is 11:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands