93redFD

My CAS wires have been cut, is there a proper way I can connect the wires together?

lovintha7

solder and shrink wrap

93redFD

ok, what should I do about the shielding? Sometimes the car will start bucking and tach needle starts twitching under normal driving comditions, so i figured that this may be the problem.

lovintha7

Check your trailing ignition.

Claudio RX-7

iTrader: (1)

i would check the cas wires inside the CAS it self, with age the plastic cover cracks and exposes the copper wires and this might be a source of noise pickup or cross triggering. This also happens to the wiring harness wires a lot too, due to the heat over the years.