Hi guys, can anybody here tell me if its possible to run a 3 rotor 20B engine with an F10X? there is a guy here that has one with an old styled distributor that Racing Beat sells to convert the 20B's ignition to distributor, and he wants to just use a fuel only computer on it. There's a guy from Puerto Rico who's got a similar setup, but i dont know how to run it. Can the F10X be set to staging with 6 cylinders, ign/3, to run the 6 injectors on the 20B? or will this have to be set up as multipont with all 6 firing at the same time?

 

If you run batchfire then you would technicly only need 2 injector drivers, one for the primarys and one for the staged secondairies. This is how people use to run them on E6a's. I don't think the ignition drivers even get used.

 

This is an F10X, no ignition outputs, what i wanna know is how to set it in the software and hook up the injectors. 6 cyl, rotary mode, stagging? or what?

 

According to the F10 x spec sheat it supports 1-2-3 rotors. See if it has that in the software.

I meant that the ign drivers don't get used whith an E6A that had a distributer on a 3 rotor.