Haltech Forum Area is for discussing Haltechs

Haltech another E6K wiring question

Thread Tools
 
Search this Thread
 
Old May 29, 2011 | 12:43 AM
  #1  
drftk1d's Avatar
Thread Starter
yatta
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jul 2004
Posts: 98
Likes: 0
From: new york
another E6K wiring question

Okay, so I think I finished converting my harness over to S4. The only thing is that there are some wires that I don't know exactly what they connect to.

There are: a red wire, orange wire, and black wire. somebody wrote battery and switched 12v on tape and stuck them to the wires. I guess its sort of obvious, but can I just take them and connect them to my battery? I heard there is supposed to be a wire that connects to the fuel pump as well but it isn't noted.

In addition, aren't there some wires that get hooked up to the ignition/coils? Those are the only free wires left aside from the ones described above.
Reply
Old Jun 10, 2011 | 08:39 AM
  #2  
IggyRE's Avatar
Junior Member
 
Joined: May 2011
Posts: 30
Likes: 0
Just did this two days ago...there should be two orange wires one red and one black and one grey...
One orange wire goes to fuel pump possitive side doesn't matter wich orange one the other orange wire goes to battery possitive side.
Black wire goes to battery ground side.
Red wire goes to battery positive side.
Grey wire goes to switched 12v source.
3 wires go to the coils off the top of my head its black with green stripe/a white with black stripe/and a light green wire.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM
EfiniGirl
Haltech Forum
2
Sep 1, 2015 09:31 PM
Professorpeanutrx7
New Member RX-7 Technical
5
Aug 15, 2015 01:38 PM




All times are GMT -5. The time now is 06:35 AM.