Rear Hatch Fire Extinguisher Mount PRE-RELEASE SALE
#1
Rear Hatch Fire Extinguisher Mount PRE-RELEASE SALE
Every Rx-7 owner should have some sort of fire suppression in their vehicles. An unsecured fire extinguisher in the cabin can become an extremely dangerous projectile in the event of an accident.
We have nearly completed the rear hatch mount for our quick release fire extinguisher mount! In the next week or so we will be offering a pre-sale of this product at a discounted rate! Please feel free to post your interest, questions, comments, criticisms here
The rear hatch extinguisher mount is a nice alternative/addition to our passenger seat mount.
Below is what the extinguisher will look like when mounted. It's easily removable if extra space is needed in the hatch.
Let us know what you think!
-Dan
EDIT: Available now for pre-release sale:
To purchase click the link below!
FD3S Fire Extinguisher Mount: Rear Hatch - SakeBomb Garage
Last edited by GoodfellaFD3S; 03-11-13 at 11:49 PM.
#4
I don't have any pictures of the mount installed without the carpet or I'd post them to show you more clearly.
-Dan
Last edited by SakeBomb Garage; 01-10-13 at 03:36 PM.
#6
Could a previous purchaser of the seat mount purchase the bracket only and reuse the detachable base, clamps, extinguisher, etc? If so, i guess I can go ahead and spend $6,000 on some nice Recaros
Trending Topics
#9
The quick release pin upgrade uses a a push button to disengage the ball detent. It's a little cleaner than the pin with the lanyard. It really comes down to personal preference. The lanyard you can just pull out where as the push pin you need to disengage and pull.
-Dan
Last edited by SakeBomb Garage; 01-13-13 at 10:04 PM.
#12
I don't believe so, but we are working on an FC specific mount
update:
The prototype rear hatch mount is complete! A few tweaks are needed then its off to production! Stay tuned for pre-release sale prices. We'll also post pictures with the mounting points exposed.
Sorry for the low quality picture guys
-Dan
#15
This will not work with the Bose system as it sits directly where the hoses pass. We are, however working on a mounting solution for people with the Bose system; but it will require purchasing the rear strut bar we have in development in addition to the quick release. With the Bose system installed there is very little space to mount an extinguisher back there without permanently modifying your vehicle.
The quick release itself will be available for purchase without a mount for any DIYers out there who want to create their own mounting solution.
-Dan
The quick release itself will be available for purchase without a mount for any DIYers out there who want to create their own mounting solution.
-Dan
#16
and remember we have a seat mount for the stock seats
FD3S Fire Extinguisher Mount: OEM Seats - SakeBomb Garage
and we have great pricing on halotron extinguishers, and are one of the few authorized automotive distributors for halon extinguishers (typically aircraft applications only). If you guys have questions about extinguishers we're happy to answer them. If you care about your car please do NOT use a cheap dry-chemical extinguisher. The powder residue can do as much damage as the fire itself.
Halon 1211 Fire Extinguisher (2.5lb) - SakeBomb Garage
Halotron Fire Extinguisher (2.5lb) - SakeBomb Garage
FD3S Fire Extinguisher Mount: OEM Seats - SakeBomb Garage
and we have great pricing on halotron extinguishers, and are one of the few authorized automotive distributors for halon extinguishers (typically aircraft applications only). If you guys have questions about extinguishers we're happy to answer them. If you care about your car please do NOT use a cheap dry-chemical extinguisher. The powder residue can do as much damage as the fire itself.
Halon 1211 Fire Extinguisher (2.5lb) - SakeBomb Garage
Halotron Fire Extinguisher (2.5lb) - SakeBomb Garage
#20
There was a holdup with our machine shop. The first prototype needed some adjustments. We should have the proof by the end of this week and hopefully start production early next week Once production is complete the brackets still need to be powder coated. I'd like to open up the pre-sale within the next two weeks and have the mounts ready to ship in about a months time. As you're aware we sometimes run into holdups and can't always stick to our release estimates. Since the quick release assembly is already complete we are only waiting on the brackets.
-Dan
We're shooting for the $165-180 price range for the mount and quick release assembly. Just have to iron out a few details and should have finalized pricing soon.
Last edited by SakeBomb Garage; 02-20-13 at 09:06 PM.
#21
This will not work with the Bose system as it sits directly where the hoses pass. We are, however working on a mounting solution for people with the Bose system; but it will require purchasing the rear strut bar we have in development in addition to the quick release. With the Bose system installed there is very little space to mount an extinguisher back there without permanently modifying your vehicle.
The quick release itself will be available for purchase without a mount for any DIYers out there who want to create their own mounting solution.
-Dan
The quick release itself will be available for purchase without a mount for any DIYers out there who want to create their own mounting solution.
-Dan
Can we use the mounting point like normal non-bose vehicles?
#22
Update time!
The mounts are just finishing up production but still need to be powder coated. We should have them ready to ship within two weeks and will be opening the pre-sale tomorrow. We will have the pricing finalized tomorrow as well Below are a few shots of the production mount installed with the quick release.
We'll have more detailed product shots soon.
Night night,
-Dan
#24
Lives on the Forum
iTrader: (6)
This looks like a really nice solution for those that want to mount an extinguisher in the trunk. I did this until I saw what you guys were doing with the front seat mount. When a fire hits, I feel more comfortable having the extinguisher within arms reach.
A product modification idea for your front seat mount: You currently list the mount as being for OEM seats only and based on your mounting design (drilled holes for the seat rails), I see why that will not work for aftermarket seats. I think you'd find if you modified the holes into "slots' you'd be able to use the mount on both OEM and aftermarket seats. I'm pretty sure this will work for you as it did for me on my "SBG" replica one-off I made. My mounting solution was just like yours and when I went to Sparco seats, it no longer worked. Found if I turned the holes into "U" slots, the mount easily accommodated my new Sparcos. If you make this modification, I think you'll accommodate everyone's needs. Food for thought.
A product modification idea for your front seat mount: You currently list the mount as being for OEM seats only and based on your mounting design (drilled holes for the seat rails), I see why that will not work for aftermarket seats. I think you'd find if you modified the holes into "slots' you'd be able to use the mount on both OEM and aftermarket seats. I'm pretty sure this will work for you as it did for me on my "SBG" replica one-off I made. My mounting solution was just like yours and when I went to Sparco seats, it no longer worked. Found if I turned the holes into "U" slots, the mount easily accommodated my new Sparcos. If you make this modification, I think you'll accommodate everyone's needs. Food for thought.
#25
Well everyone we are happy to announce the pre-release sale is active just in time for tax refunds!
Note: This mount is deigned to work in any NON-Bose system FD3S RX-7 and accepts any 3” standard 2.5lb extingusher.
We are also one of the few authorized automotive Halon distributors out there, and offer both Halon and Halotron extinguishers on our site.
2.5lb Halon Extinguisher
2.5lb Halotron Extinguisher
Highlights:
Pre-Sale Pricing :$165.00
Ends 3/31
Expected ship date: March 23
To purchase click the link below!
FD3S Fire Extinguisher Mount: Rear Hatch - SakeBomb Garage
As always, don't hesitate to ask questions or post comments For individual components please PM us.
-Dan
Note: This mount is deigned to work in any NON-Bose system FD3S RX-7 and accepts any 3” standard 2.5lb extingusher.
We are also one of the few authorized automotive Halon distributors out there, and offer both Halon and Halotron extinguishers on our site.
2.5lb Halon Extinguisher
2.5lb Halotron Extinguisher
Highlights:
- OEM Look and Functionality: Seamlessly mounts in the rear hatch without permanent modification
- Track Safe: Pass tech inspection without a problem, metal to metal mounting.
- Instant Access: Quick release assembly easily accessable in the rear hatch
- Protect your investment
- Meticulous Design and Manufacturing: Black anodized aircraft grade 6061 quick-release assembly.
- Lightweight: but strong CNC laser cut steel mounting assembly.
- Includes Hardware: Comes with all hardware required for complete install, including extinguisher straps.
- Pictorial Installation Guide: Full detailed step by step how-to guide for a quick and hassle free install.
- Made in the USA!
Pre-Sale Pricing :$165.00
Ends 3/31
Expected ship date: March 23
To purchase click the link below!
FD3S Fire Extinguisher Mount: Rear Hatch - SakeBomb Garage
As always, don't hesitate to ask questions or post comments For individual components please PM us.
-Dan
Last edited by GoodfellaFD3S; 03-11-13 at 11:35 PM.