Garage Alpha x TurboJeff 51r Battery Tray - Another Legend Reborn
The following users liked this post:
garage alpha (07-25-19)
#38
We got JHooks! We'll include them with every order.
Also, we should be picking up from the powdercoater in a day or two.
If you want to order now, we setup a page on the site:
https://garagealpha.com/products/maz...r-battery-tray
Also, we should be picking up from the powdercoater in a day or two.
If you want to order now, we setup a page on the site:
https://garagealpha.com/products/maz...r-battery-tray
#40
As for the REST of you...
These are now OFFICIALLY available!
Click here to order:
GarageAlpha x TurboJeff Battery Tray
#41
Just a heads up!
We've started shipping these and discovered the included J-Hooks may be a taaaaad long. Nothing that impedes install or hood closing - but it might look a bit goofy.
We sourced 10in J-Hooks since I've seen Group 51 batteries listed between 8-3/4in to 9-3/8in tall depending on manufacturer.
If your battery is on the shorter side and you have too much left over thread, cutting them is straight forward. Hack saw, dremel, angle grinder, bolt cutters - just choose your weapon and clean up the thread once you're done.
We've started shipping these and discovered the included J-Hooks may be a taaaaad long. Nothing that impedes install or hood closing - but it might look a bit goofy.
We sourced 10in J-Hooks since I've seen Group 51 batteries listed between 8-3/4in to 9-3/8in tall depending on manufacturer.
If your battery is on the shorter side and you have too much left over thread, cutting them is straight forward. Hack saw, dremel, angle grinder, bolt cutters - just choose your weapon and clean up the thread once you're done.
Last edited by garage alpha; 08-10-19 at 08:28 AM.
The following users liked this post:
Project88Turbo (08-11-19)
#43
Rx7 Wagon
iTrader: (16)
@DaleClark mentioned that Miata J hooks were a bit shorter, I'm not sure about the measurements. My stock J hooks from atkins are a little taller than the battery, but no interference and don't bother me enough to make the priority spend list.
#44
RX-7 Bad Ass
iTrader: (55)
Just went and measured the J-bolts on my car, they are 6.5" approx. from the bottom of the hook to the top.
I am actually running a Miata battery in a modified stock tray for my front mount and they fit perfectly. REALLY wish I could use the Turbojeff tray but it doesn't fit with my front mount.
Dale
I am actually running a Miata battery in a modified stock tray for my front mount and they fit perfectly. REALLY wish I could use the Turbojeff tray but it doesn't fit with my front mount.
Dale
#45
Do it right, do it once
iTrader: (30)
Just went and measured the J-bolts on my car, they are 6.5" approx. from the bottom of the hook to the top.
I am actually running a Miata battery in a modified stock tray for my front mount and they fit perfectly. REALLY wish I could use the Turbojeff tray but it doesn't fit with my front mount.
Dale
I am actually running a Miata battery in a modified stock tray for my front mount and they fit perfectly. REALLY wish I could use the Turbojeff tray but it doesn't fit with my front mount.
Dale
The following 2 users liked this post by turbojeff:
DaleClark (08-21-19),
garage alpha (08-29-19)
#46
Sorry to bring this back up. Im trying to see if this will allow a little more room to place the battery because I have the M2 intake box and M2 medium mount intercooler. Factory battery box and tray will not fit. I literally just need like 1 inch of space to fit the battery next to the intercooler
#48
The following users liked this post:
MaximaPower (04-05-20)
#50
Rx7 Wagon
iTrader: (16)
Sorry to bring this back up. Im trying to see if this will allow a little more room to place the battery because I have the M2 intake box and M2 medium mount intercooler. Factory battery box and tray will not fit. I literally just need like 1 inch of space to fit the battery next to the intercooler
The following users liked this post:
MaximaPower (04-05-20)