SakeBomb Garage

iTrader: (17)

What you can expect from our oil cooler kits:

• Maximum cooling efficiency to protect our already hot running motors, and eliminate overheating concerns by taking significant load off of the water cooling system.
• Direct bolt-on, with no fabrication, modification, or custom work involved
• OEM look and fit
  
• Two cooler sizes: Different oil-cooler capacities to fit your car's cooling requirements, and your budget.
  
• Coolers can be swapped out at any time to upgrade capacity, and coolers will work with '93+, '99 spec, and most aftermarket bumpers.
• Over-Engineered: Pressure and temperature ratings for ALL of our lines and fittings vastly exceed the maximum pressure and temperature ever generated by the oiling system, to ensure durability and longevity.

All of our kits include:

• Black Setrab oil coolers
• Mocal 180 degrees oil thermostat
• Lightweight aluminum mounting brackets
  
• Stainless steel mounting hardware
• All lines (rubber/stainless/nylon racing) come pre-assembled and pressure tested with high quality (and subtle looking) black and silver Mocal fittings (only the best).
• Aluminum -10AN Spanner (Wrench) included to tighten down your fittings.
• Step by step instructions

Comes with twin 19-row Setrab coolers, High-Pressure Black rubber hose (OEM look) with high quality black and silver Mocal end fittings pre-installed. Included with every kit is a -10AN aluminum spanner (wrench) to safely tighten the aluminum fittings without damaging them. Everything you need to install the coolers on your car is included, down to every last nut, bolt, washer, or spacer... and even the wrench! (*As our brackets are designed to accept both 19-row or 25-row coolers, they can be upgraded to the larger capacity coolers at any time!)

Upgrade to 25-row Setrab cores. Even higher cooling capacity then our twin 19 row kit. We have reports of customers staying out ALL DAY at the track without any sign of rising temps! This setup really is cool! Don’t cut your track day short. Also 20b and high-HP 13b's <nobr style="color: darkgreen; font-weight: normal; font-size: 100%; font-family: verdana,geneva,lucida,'lucida grande',arial,helvetica,sans-serif;" id="itxt_nobr_31_0"></nobr>should consider this setup.

Those of you running a '99 spec bumper or aftermarket bumper will need to upgrade to this redesigned kit so that the coolers clear the bumper and can make better use of the larger inlets. (Please see the *note below)



Highest pressure and temp rating of all the lines we offer (and they look great!) but care must be taken when routing them as the SS braids can wear into anything they come in contact with.

Black Nylon reinforced lines, ultra lightweight, high pressure and temp rating (and they look great!). These nylon lines have the benefits of braided reinforcement (like SS lines) but without the abrasion problems and lack of flexibility associated with SS lines.





Stainless braided line option



Lightweight nylon braided line option

*A note about the 99 oil cooler upgrade, and about aftermarket bumpers.

Cost: Unfortunately, the ‘99 coolers needed to be repositioned for the 99 bumper and rebar, and special fittings were required to then clear the headlights. In addition there is a more complex bracket setup required to relocate it to the proper position. For this reason the price of the 99 kit is significantly higher. This is directly due to the cost of the extra parts... we actually take a loss on the 99 “upgrade” for this reason, but it was the only way to make them fit the 99 bumper, be positioned to make more efficient use of the larger bumper inlets, and also work with the stock 99 fog lights.

Aftermarket bumpers: We also engineered a small amount of adjustability into the brackets in hopes that people with aftermarket bumpers could adjust the position of the oil coolers to work with their bumper. We obviously could not test the coolers with every aftermarket bumper out there (so we cant guarantee 100% that they will fit without modification) but more than likely, there is enough adjustability to fit the majority of aftermarket bumpers out there. You have an even better chance if your bumper uses the 99 lights or similar, as those bumpers were typically designed to work with the stock 99 cars’ oil cooler setup (which is basically how ours fits).

[CENTER]**GB Instructions**


Please add your forum username, and any kit options you want to the list below.

Deposit: Please send a $50.00 non-refundable deposit to hold your spot in the GB. You can not sell your spot on the list either. At the end of the GB (July 23 rd) final payment must be submitted.

PayPal address - sakebombgarage@gmail.com



Thanks,
Dan and Heath
SakeBomb Garage

SakeBomb Garage

iTrader: (17)

I will update who's sent deposits in the next few days

-Dan

Project D1

iTrader: (2)

Excellent, full payment coming this upcoming week

SakeBomb Garage

iTrader: (17)

up

SWAT81

iTrader: (14)

Just a little side note, there isn't any fees involved with paypal if you send it under as "gift" and deposit money to your paypal account instead of using a credit card.

RotorMotor

iTrader: (5)

we used to accept personal payments, until paypal finally locked us out of being able to accept then last year : We can also take money orders or personal checks to get around paypal fees. PM us if you want to process a payment via check/MO

Rawbz08

iTrader: (7)

Oh I'm gonna make my way into this gb as well.
Track, 99, nylon. Will make deposit in am.

Rawbz08

iTrader: (7)

ex RotorMotor, (Track, 99-spec, Nylon)
1. silver-rex-7 (track kit, 99 spec mounts, nylon lines)
2. Doble Edition (track kit, nylon lines)
3. johgar - ?
4. Sephek - (track, 99, nylon)
5. Project D1 - (track, 99, SS)
6. Icemastr - (track, 99, nylon)
7. RXeckless
8. Rejckt - (track)
9. 20bseven - (track, 99 spec, Nylon)
10. Rawbz08 - (track, 99 spec, Nylon) (deposit sent)

Azrae1

iTrader: (3)

GB list
ex RotorMotor, (Track, 99-spec, Nylon)
1. silver-rex-7 (track kit, 99 spec mounts, nylon lines)
2. Doble Edition (track kit, nylon lines)
3. johgar - ?
4. Sephek - (track, 99, nylon)
5. Project D1 - (track, 99, SS)
6. Icemastr - (track, 99, nylon)
7. RXeckless
8. Rejckt - (track)
9. 20bseven - (track, 99 spec, Nylon)
10. Rawbz08 - (track, 99 spec, Nylon) (deposit sent)
11. Azrae1 - (track, 99 spec, Nylon)

RotorMotor

iTrader: (5)

Golden Ticket!
Here's a picture of the golden ticket prize. Again if we reach 20 GB participants, we will randomly place a golden ticket in one of the boxes. If you are the lucky recipient of the ticket you can cash it in for this special golden set of our HID bi-xenon projector headlights ($900+), with bulbs, ballasts, and harness included. We've been told by MANY previous customers that this is one of the best safety mods they have done to their car... "its like daytime at night". This is true modern day state of the art lighting for your FD. More info here -> https://www.rx7club.com/vendor-classifieds-276/gb-2-fd-bi-xenon-hid-projectors-pop-ups-sbg-915186/

Sephek

iTrader: (20)

Correct me if I'm wrong but paypal doesn't charge a fee when you send money directly from a bank account. In other words, if I pay using funds from my bank account can the 3% fee be waived?

RotorMotor

iTrader: (5)

Yeah see the "e-check" option. We can also take a money order or personal check (but please PM us for that option).

RotorMotor

iTrader: (5)

Good luck everyone!

SakeBomb Garage

iTrader: (17)

Updated list, I have a $200 deposit with no forum name also, so once I find out who's that is I'll add it to the list.

GB list
ex RotorMotor, (Track, 99-spec, Nylon)
1. silver-rex-7 (track kit, 99 spec mounts, nylon lines) - $50 Deposit
2. Doble Edition (track kit, nylon lines)
3. johgar - ?
4. Sephek - (track, 99, nylon) - $50 Deposit
5. Project D1 - (track, 99, SS)
6. Icemastr - (track, 99, nylon)
7. RXeckless ?
8. Rejckt - (track)
9. 20bseven - (track, 99 spec, Nylon)
10. Rawbz08 - (track, 99 spec, Nylon) - $50 Deposit
11. Azrae1 - (track, 99 spec, Nylon)

SakeBomb Garage

iTrader: (17)

If you haven't sent a deposit please do so now so we know who's serious.

GB list
ex RotorMotor, (Track, 99-spec, Nylon)
1. silver-rex-7 (track kit, 99 spec mounts, nylon lines) - $50 Deposit
2. Doble Edition (track kit, nylon lines) - $200 Deposit
3. johgar - ?
4. Sephek - (track, 99, nylon) - $50 Deposit
5. Project D1 - (track, 99, SS)
6. Icemastr - (track, 99, nylon)
7. RXeckless ?
8. Rejckt - (track)
9. 20bseven - (track, 99 spec, Nylon)
10. Rawbz08 - (track, 99 spec, Nylon) - $50 Deposit
11. Azrae1 - (track, 99 spec, Nylon)

Thanks,
Dan

SakeBomb Garage

iTrader: (17)

*Update*

In an effort to pass more savings onto SakeBomb Garage customers we'll be offering an additional $100 off the oil cooler group buy.

That's in addition to the existing $150 GB discount, bringing the total savings to $250--over a 20-percent discount on the coolers!


Designed and engineered for your RX-7. Proven on the street and track. Period.

Anyone interested in taking advantage of this KILLER offer must submit payment by next week by:
MONDAY, JULY 18th AT 12:01AM PST.

Thanks,
Dan

Azrae1

iTrader: (3)

Is that submit payment in full by Monday July 18th?

Rawbz08

iTrader: (7)

Or does the additioal savings count for deposits made by that date.

SakeBomb Garage

iTrader: (17)

Ah good question! I forgot to add that part. In order to receive the savings half your total is due by the date listed above. We realize this simply may not be possible for some as not everyone has that amount of funds instantly available.

If you are unable to send payment by MONDAY, JULY 18th AT 12:01AM PST. Please PM us and we will work something out with you

Thanks,
Dan

chiefboon

On the verge of sending the 50% deposit... when can we realistically expect to receive our kits? FWIW I am considering a street kit for 99 spec bumper (no other add-ons).

thanks.

SakeBomb Garage

iTrader: (17)

After the GB is concluded it will take us roughly a month to gather all the components. Putting together one or two oil cooler kits is easy since the quantities are low, but when ordering in bulk it sometimes takes slightly longer.

For example our last group buy took slightly longer to complete due to a volcano that erupted over seas. Planes were grounded and our shipment was delayed a few weeks. Now I don't expect any more volcano's will erupt, but I'm just saying sometimes unexpected things happen

-Dan

chiefboon

Thanks for clarifying. Will decide shortly... it's not looking like this group buy is going to hit the 20 person threshold for the golden ticket however only one new-add in the last two weeks.

RotorMotor

iTrader: (5)

We're hoping we can get the numbers up, if not we can still run the golden ticket, but the prize will be something much smaller like a set of our brake lines as opposed to the thousand dollar headlights


Again to anyone interested, from now till Monday 7/18 ONLY we will be offering a total $250 discount off your total oil cooler purchase (normal GB pricing still applies for the remainder of the GB).

To take advantage of the additional $100 savings, please submit a minimum 1/2 deposit for your kit to -> sakebombgarage@gmail.com (in the notes section please list your forum user name, desired kit options, and the promotional code: OilCooler_GB_Presale )

for example this would bring the price down to:
Base Street Kit (19row Setrabs) - $1080 - $250 = $830
Base Track Kit (25row Setrabs) - $1080 + $150 - $250 = $980

SakeBomb Garage

iTrader: (17)

Updated.

GB list
ex RotorMotor, (Track, 99-spec, Nylon)
1. silver-rex-7 (track kit, 99 spec mounts, nylon lines) - $50 Deposit
2. Doble Edition (track kit, nylon lines) - $700 Deposit
3. johgar - ?
4. Sephek - (track, 99, nylon) - $50 Deposit
5. Project D1 - (track, 99, SS)
6. Icemastr - (track, 99, nylon)
7. RXeckless ?
8. Rejckt - (track)
9. 20bseven - (track, 99 spec, Nylon)
10. Rawbz08 - (track, 99 spec, Nylon) - $100 Deposit
11. Azrae1 - (track, 99 spec, Nylon)

Thanks,
Dan

Rawbz08

iTrader: (7)

^ I guess I have to pay more attention to the updates. 