Curious if anyone would be interest in dual oil cooler lines?
03-13-15, 11:37 PM
#1
Curious if anyone would be interest in dual oil cooler lines?
Hello All,
I am gauging interest to see if members are interested in some dual oil cooler lines that I would make.
The lines would run similar to my setup in my 20b FD.
The estimated price for the lines/fittings (already assembled/cut/etc.) would be as follows:
-10AN Stainless braid w/ either black or blue AN fittings---$350-$400
This price depends on if the buyer would be more interested in the 2000 series, 3000 series, or other type of series
-10AN nylon braid w/ wither black or blue AN fittings----$400-450
Once again this depends on if the buyer would be more interested in the 2000 series, 3000 series, or other types of series
*Note* Prices could be less if the amount of members increases, but will not be more than estimated price(s).
The kit would line kit would include the following ALL CUT and ASSEMBLED :
1) 2 adapters (for oil pedestal and front cover)
2) 5 90* fittings
3) 2 150* fittings
4) 1 45* fitting
5) 2 straight fitting
6) 4 fittings for oil coolers (2x each oil cooler)
This line kit will be made out of ONLY Fragola pro or race series products (some may know aeromotive uses Fragola fittings * check the stamp on the fittings
).
I am not a rep for or sponsored by Fragola.
The kits prices would include shipping to the lower 48.
At this time I am not able to produce a dual oil cooler kit as I am still in the process of working with companies for better deals on its products.
For those interested, the goal is this:
I would like to have an initial down payment of $100 via PayPal from at least 10 members to get the ball rolling on this. At this time I would not like to take more than 25 orders as I prefer not taking too long to get parts shipped out to the buyers.
The process is this:
1) Once I obtain the desired number of members that would like to get in on this buy (and deposit) I will start ordering the necessary parts needed to complete the lines.
2) Each kit I finish I will contact the buyer and request the remaining payment for the lines.
3) Once I receive the remaining payment from buyer I will ship the line kit out
Warranty:
Because the Fragola products already come with its manufacturing warranty, I will just add that when the buyer receives the kit I will allow for replacement or repair of any line that may leak from the fittings for the first 6 months of use. Anything after that please contact me and I am sure we can work something out.
What I am asking from buyer:
For those that are interested, I would like for the buyer to put the following:
"1 (2, 3, 4, etc. whatever number of member it comes to): Name of member, type of hose (nylon(black) or Stainless), type of fitting (2000 series/3000 series), color of fitting (black, blue(some might be blue and red), and type of front cover they are running."
Down Payment/ Payment
No down payment should be made until the desired number of members are scheduled.
Full payment will only be made once the lines are ready to ship out (will likely be USPS unless Buyer prefers other services).
ETA of Buyer Receiving Lines
Once requirement is met, hopefully the line kit will not take more than two (2) weeks to get to the Buyer. Receiving the material for me to make the line kit is going to take the longest.
If you have any questions for me please feel free to post on here.
I will get more pictures of my setup if there seems to be a high level of interest.
Goal is at least 10 members showing interest. Once number of members is met, I will update this post with my PayPal information.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
+
+
Thanks for your time!
Nick
I am gauging interest to see if members are interested in some dual oil cooler lines that I would make.
The lines would run similar to my setup in my 20b FD.
The estimated price for the lines/fittings (already assembled/cut/etc.) would be as follows:
-10AN Stainless braid w/ either black or blue AN fittings---$350-$400
This price depends on if the buyer would be more interested in the 2000 series, 3000 series, or other type of series
-10AN nylon braid w/ wither black or blue AN fittings----$400-450
Once again this depends on if the buyer would be more interested in the 2000 series, 3000 series, or other types of series
*Note* Prices could be less if the amount of members increases, but will not be more than estimated price(s).
The kit would line kit would include the following ALL CUT and ASSEMBLED :
1) 2 adapters (for oil pedestal and front cover)
2) 5 90* fittings
3) 2 150* fittings
4) 1 45* fitting
5) 2 straight fitting
6) 4 fittings for oil coolers (2x each oil cooler)
This line kit will be made out of ONLY Fragola pro or race series products (some may know aeromotive uses Fragola fittings * check the stamp on the fittings
). I am not a rep for or sponsored by Fragola.
The kits prices would include shipping to the lower 48.
At this time I am not able to produce a dual oil cooler kit as I am still in the process of working with companies for better deals on its products.
For those interested, the goal is this:
I would like to have an initial down payment of $100 via PayPal from at least 10 members to get the ball rolling on this. At this time I would not like to take more than 25 orders as I prefer not taking too long to get parts shipped out to the buyers.
The process is this:
1) Once I obtain the desired number of members that would like to get in on this buy (and deposit) I will start ordering the necessary parts needed to complete the lines.
2) Each kit I finish I will contact the buyer and request the remaining payment for the lines.
3) Once I receive the remaining payment from buyer I will ship the line kit out
Warranty:
Because the Fragola products already come with its manufacturing warranty, I will just add that when the buyer receives the kit I will allow for replacement or repair of any line that may leak from the fittings for the first 6 months of use. Anything after that please contact me and I am sure we can work something out.
What I am asking from buyer:
For those that are interested, I would like for the buyer to put the following:
"1 (2, 3, 4, etc. whatever number of member it comes to): Name of member, type of hose (nylon(black) or Stainless), type of fitting (2000 series/3000 series), color of fitting (black, blue(some might be blue and red), and type of front cover they are running."
Down Payment/ Payment
No down payment should be made until the desired number of members are scheduled.
Full payment will only be made once the lines are ready to ship out (will likely be USPS unless Buyer prefers other services).
ETA of Buyer Receiving Lines
Once requirement is met, hopefully the line kit will not take more than two (2) weeks to get to the Buyer. Receiving the material for me to make the line kit is going to take the longest.
If you have any questions for me please feel free to post on here.
I will get more pictures of my setup if there seems to be a high level of interest.
Goal is at least 10 members showing interest. Once number of members is met, I will update this post with my PayPal information.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
+
+
Thanks for your time!
Nick
03-14-15, 07:28 AM
#5
Yeah it's just lines w/fittings. I'm glad you pointed out they might be expensive.
Please let me know what you believe is a reasonable price. This will allow me to verify if it'll be worth the time/effort it'll take to make this kits.
Once again I'm just trying to see if people are interested in precut/assembled lines at this time.
I'm still trying to work out a deal with manufactures for coolers and thermostats.
Thanks again,
Nick
Please let me know what you believe is a reasonable price. This will allow me to verify if it'll be worth the time/effort it'll take to make this kits.
Once again I'm just trying to see if people are interested in precut/assembled lines at this time.
I'm still trying to work out a deal with manufactures for coolers and thermostats.
Thanks again,
Nick
Thread
Thread Starter
Forum
Replies
Last Post