So to clarify. I will need to get the FC front hubs? I'm also assuming I will need the FC bearings as well? Or can I use the se bearings? Just wondering so I can go ahead an start gathering new parts....
|
Originally Posted by myfree7
(Post 11757617)
So to clarify. I will need to get the FC front hubs? I'm also assuming I will need the FC bearings as well? Or can I use the se bearings? Just wondering so I can go ahead an start gathering new parts....
|
Cool thanks!!! Just want to make sure I get the right parts the first time.
|
It's getting close!..... Can't wait to get this kit finally.
|
Just got off the phone with the machine shop. I'll be getting part of the order next week. I'll take some picture and post them when I get my hands on them.
I want to thank everyone for be patient. I know my machine shop is not the fastest but I promise I'll deliver. This is to important for everyone. |
No problem man! Without your doing we wouldn't be getting these so thank you!!!!
|
I recognize I am too late to get in the first run, however, I am interested in a full kit when the time comes for the next batch. I will keep $425 saved to be ready whenever this happens. Thank you so much to KansasCityREPU for taking the time to do this and I look forward to another round!
|
Called the machine shop guy today. They are running the parts and will be doing the welding this weekend and powder coating next week.
|
Got a picture of the first parts off the line. These are the rear caliper brackets. These are in red because they are for testing and fitment. All the production parts will be in black.
I tried to nail the machine shop down on when I would have all the parts but I'm just a little guy as far as they are concerned. I'm hoping for next week. http://i1133.photobucket.com/albums/...ps8e490ef5.jpg |
Parts
Can I still get in or do I need to wait til the next go around?
|
Originally Posted by Diver22
(Post 11777553)
Can I still get in or do I need to wait til the next go around?
|
Hey I just need the rear caliper bracket is this still possible
|
I spoke with the machine shop today. They are saying the front should be done next Friday 8/15 and the rear 8/22.
On a side note, how many people would be interested in a strut tower brace? Next time I'm at the machine shop I'll be dropping mine off to have measured drawings made up. |
Originally Posted by doogy2
(Post 11781499)
Hey I just need the rear caliper bracket is this still possible
|
Sounds good, I am in no hurry. :)
While you are fabbing things up, how about an R&P kit for the FB. I was hoping for the Respeed kit, but we all know how that went. |
Originally Posted by Kameron13
(Post 11781591)
Sounds good, I am in no hurry. :)
While you are fabbing things up, how about an R&P kit for the FB. I was hoping for the Respeed kit, but we all know how that went. If anyone has a RE-Speed R&P and wants to send it to me I'll make it worth your while. |
I'll keep my fingers crossed that some generous FB owner out there is willing and able to have his R&P kit cloned. :)
|
+1!
|
We'll let me know if you have any extras, I need the fronts for sure, I can go either way on the rears.
|
Id do a strut tower brace.
|
Thanks echo let me know for the rack kit I'm going to work on one very soon. As soon as I get some free time but it's going were the curent steering shaft are
|
For the brace I would need just the parts that get joined to the struts cuse I would have to do some modifying to it to clear intercooler pipes
|
Eric, any ETA from the machine shop? thanks
|
Originally Posted by echo412
(Post 11785491)
Eric, any ETA from the machine shop? thanks
Sorry it's taking so long. I've been scared at trying to push them to much. Their a pretty big shop here and they could have told me to hit the bricks. If I do another run I might front the funds myself and worry about getting paid when I sell them. |
Originally Posted by KansasCityREPU
(Post 11785654)
They are saying the front should be done this Friday 8/15 and the rear 8/22. I'm going to call them tomorrow to help push them along.
Sorry it's taking so long. I've been scared at trying to push them to much. Their a pretty big shop here and they could have told me to hit the bricks. If I do another run I might front the funds myself and worry about getting paid when I sell them. |
All times are GMT -5. The time now is 09:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands