General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

wont start when hot

Thread Tools
 
Search this Thread
 
Old Dec 7, 2003 | 06:31 PM
  #1  
stmelvin's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 6
Likes: 0
From: Ione, CA
Unhappy wont start when hot

I have no idea why it wont start when it gets hot. I wait about 20 minutes and it fires right up. The cars performance has not changed. as long as it does not stall out at a signal It surges from 500 rpm to 750. The other problem is the warning lights. They dont all come on. the Fuel light stays on low like there is a ground problem the clock works fine and the door is open light comes on that works good.
Reply
Old Dec 7, 2003 | 06:34 PM
  #2  
stmelvin's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 6
Likes: 0
From: Ione, CA
i forgot to tell you what year it is and that its a turbo 88 turbo II sorry scott
Reply
Old Dec 7, 2003 | 11:04 PM
  #3  
gambone's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (3)
 
Joined: Jun 2003
Posts: 1,125
Likes: 13
From: jefferson Or
go to 3RotorRocket and check out the reply I just made
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 01:28 PM.