Wideband O2 sensors + controllers
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: Irvine, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Wideband O2 sensors + controllers
I'm really new to "widebandland", so could anyone point me to some sensor and controller manufacturers so I can do some research? Any places with good info?
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
http://www.performanceartmotorsports...owbafmkit.html a fellow named OPEC has one. If you put the letters fjo in the search engine you get a lot of 02 sensor posts. Also http://www.techedge.com.au/vehicle/wbo2/default.htm
#3
Full Member
Thread Starter
Join Date: Jan 2002
Location: Irvine, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Does the FJO work with the stock computer? It doesn't mention that it works with anything except their engine management system. I'm looking to replace the stock O2 sensor with a wideband.
#4
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
With what little I know, I'd say no you can't use it with a stock ECU. Stock 02 is 0-1v. I belive the wideband are 1-5v. Don't take this as a definitive answer. Juat a wag.
EDIT: This thread:https://www.rx7club.com/forum/showth...threadid=47450 and the responses by OPEC
EDIT: This thread:https://www.rx7club.com/forum/showth...threadid=47450 and the responses by OPEC
Last edited by HAILERS; 02-13-02 at 03:24 PM.
#5
Full Member
Thread Starter
Join Date: Jan 2002
Location: Irvine, CA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
What about a standalone like the AEM unit? I actually have one of these on order, but Jason said that I would need a controller for the sensor. I'm not sure what a controller does, which is why I'm looking for info.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM