What Clutch ?
#1
Full Member
Thread Starter
What Clutch ?
Hi,
i have tried searching on this forum for clutches, but no luck in what i am trying to find.....
I have a 93 Generation 3 rx-7, I need to buy a clutch for it, but the thing is there is soo many to choose from, I need a good clutch, my car will be modified soon I plan to have around the 400BHP mark, I want a clutch that is streetable which I can drive everyday and I also do a some 1/4mile runs, so just something that is alot better than the stock one? just something that does not engage hard ! fastroad use.
Could you please recommend a clutch for my use?
any decent places to buy maybe online ?
Thank you
Shaq.
i have tried searching on this forum for clutches, but no luck in what i am trying to find.....
I have a 93 Generation 3 rx-7, I need to buy a clutch for it, but the thing is there is soo many to choose from, I need a good clutch, my car will be modified soon I plan to have around the 400BHP mark, I want a clutch that is streetable which I can drive everyday and I also do a some 1/4mile runs, so just something that is alot better than the stock one? just something that does not engage hard ! fastroad use.
Could you please recommend a clutch for my use?
any decent places to buy maybe online ?
Thank you
Shaq.
#4
Full Member
Thread Starter
cool thanks guys
ACTman
do you know a website or something i can order the clutch from ?
You think this clutch would be good? good for around 400 bhp when i mod the car ? i will be going quite a few 1/4 mile launches and stuff...........
Thanks
Shaq
ACTman
do you know a website or something i can order the clutch from ?
You think this clutch would be good? good for around 400 bhp when i mod the car ? i will be going quite a few 1/4 mile launches and stuff...........
Thanks
Shaq
Last edited by shaq; 12-27-03 at 07:28 AM.
#5
Full Member
Thread Starter
been doin some research on the ACT clutches...
Was wondering if you could advise me...
what do you think of this setup
"ACT Heavy Duty Pressure Plate #MZ011, Street Strip Racing Disc #MZSD069, Release Bearing # RB600, Pilot Bearing # PB1013 and Alignment Tool # AT03. This kit will be capable of handling 402 ft./lbs of torque and have a 40% increase in clamping force. This Clutch is recommended for Street racer that needs a stronger but comfortable clutch for everyday driving"
should i go for the x-treme pressure plate instead ?? i want smooth engagement still, would this be ok with the xtreme pressure plate ??
Thanks again
Shaq
Was wondering if you could advise me...
what do you think of this setup
"ACT Heavy Duty Pressure Plate #MZ011, Street Strip Racing Disc #MZSD069, Release Bearing # RB600, Pilot Bearing # PB1013 and Alignment Tool # AT03. This kit will be capable of handling 402 ft./lbs of torque and have a 40% increase in clamping force. This Clutch is recommended for Street racer that needs a stronger but comfortable clutch for everyday driving"
should i go for the x-treme pressure plate instead ?? i want smooth engagement still, would this be ok with the xtreme pressure plate ??
Thanks again
Shaq
#6
Junior Member
Originally posted by shaq
should i go for the x-treme pressure plate instead ?? i want smooth engagement still, would this be ok with the xtreme pressure plate ??Shaq
should i go for the x-treme pressure plate instead ?? i want smooth engagement still, would this be ok with the xtreme pressure plate ??Shaq
Trending Topics
#8
Junior Member
We have dealers all over the US and there are many distributors and internet shops that ship worldwide, but I am not sure which one to recommend. You just have to shop around. We can also ship direct from us, but you will probably end up paying a little more since we don't discount the parts like other shops do.
#9
Full Member
Thread Starter
ACTman
cool thanks i will have a look at a few shops, one last question tho. please
so you think i should keep away from the Street Strip Racing Disc ? why is that ? is it too harsh ?
Thanks again
Shaq
cool thanks i will have a look at a few shops, one last question tho. please
so you think i should keep away from the Street Strip Racing Disc ? why is that ? is it too harsh ?
Thanks again
Shaq
#10
aka KingDrunk
Join Date: Apr 2003
Location: Atlanta, GA
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
ATC ss clutch. good for around 400hp and more. you can find it at www.rx7store.net
#11
Full Member
Thread Starter
cheers dude i had a look i will call them after the new year, i was gonna buy it for a guy off ebay but he nerver responded to my questions so i will order it from here now.
I will let you guys know how the clutch feels like once i have got it.
Thanks again
Shaq
I will let you guys know how the clutch feels like once i have got it.
Thanks again
Shaq
#12
BMW Tech
Join Date: Mar 2002
Location: Auburn, Alabama
Posts: 845
Likes: 0
Received 0 Likes
on
0 Posts
ACT Heavy Duty Street/strip setup is the ONLY way to go, IMO. I had the same clutch on my old '89 and '95 Probe GT's. Beat the **** out of the Clutchmasters I had for awhile
Thread
Thread Starter
Forum
Replies
Last Post