technical question / costom ignition
03-14-06, 12:04 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2004
Location: Canada
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
technical question / costom ignition
i am surching for a cheep way to drive my 6 msd coils with ( 5 positive 0 to 5V rising or falling edge) and 1 ground falling edge output...
i don't want to use an MSD / CDI box
last summer i used toyota ignitors on leading only ... this summer i will use Split Timing and i need to know what can i use
( my tercel ignotors worked for 2 or 3 weeks and die...)
maby i can use honda hacord ignitor for the negative output
what to use with the 5 stantards output?
it is not a race car
thx in advance ant sry for my bad english
i don't want to use an MSD / CDI box
last summer i used toyota ignitors on leading only ... this summer i will use Split Timing and i need to know what can i use
( my tercel ignotors worked for 2 or 3 weeks and die...)
maby i can use honda hacord ignitor for the negative output
what to use with the 5 stantards output?
it is not a race car
thx in advance ant sry for my bad english
03-15-06, 08:22 AM
#2
Rotary Enthusiast
Join Date: May 2002
Location: Tallahassee, FL
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
bump for a good question:
my situation is similar, i'm looking for something to replace my stock ignitor (which i suspect may be bad) but i don't want to spend the $160 on a relacement. I'd prefer if I could use something like the $12 GM ignitor.
my situation is similar, i'm looking for something to replace my stock ignitor (which i suspect may be bad) but i don't want to spend the $160 on a relacement. I'd prefer if I could use something like the $12 GM ignitor.
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
SakeBomb Garage
0
09-04-15 05:20 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM