supra transmission
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Hawaii
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
supra transmission
I am trying to mate a 13b 6pt to an w58 supra tranny. I was wondering if any one knew were to get the bellhousing adaptor? It's the last thing im missing.. If any one can point me in the right direction id apreciate it.
thanks
thanks
#5
For sale!! PM
Join Date: Jun 2006
Location: Monroe, MI/Anderson, SC
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
try the 20B forum because i know of guys using helical cut gears in the 6-speeds attached to some monster HP 20B's. pretty sure there will be alot of work involved. including custom ****
#6
Topless, & Barely Legal
iTrader: (2)
At Kiwi-RE they have a supra gearbox adaptor, though it doesn't explain what it really is, or which supra transmission it would be for.... my guess is the getrag 6-spd from the MKIV's. Here is the link: http://www.kiwi-re.com/wwd_showroom_cat3_8.php
#7
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Hawaii
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Well... its going in a Sr5 hachi, auto. the crossmember and drive shaft is supposed to match up to the w58 as well as the shifter hole. I would have gone 20v 4age black top. but i figured since i had most of the parts on hand, plus the fact that i wouldnt have to Find/swap all the gts parts such as gas tank, fuel lines transmission and etc... I'm going for a carb set up in the 13b so i wouldnt need to convert the chassis to fuel injection. In the end i figured it wold only be more reliable, rev happy ,and more powerfull... Not to mention I'm a rotor head.
So... custom only?
So... custom only?
Trending Topics
#8
At Kiwi-RE they have a supra gearbox adaptor, though it doesn't explain what it really is, or which supra transmission it would be for.... my guess is the getrag 6-spd from the MKIV's. Here is the link: http://www.kiwi-re.com/wwd_showroom_cat3_8.php
~Ramy
#9
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Hawaii
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Wow, Thanks. Ima have kiwi conferm this. and my project is on the way once agien. So are you saying that i have to use the s5/s4 bell housing? as in Trans/adapter/bell housing, or i just use the adapter on the w58 bell housing and bolt it to the 13b?
#10
No need to. What I posted above was a direct quote from Kiwi themselves. I don't post heresay
That would be a question/clarification best posed directly to them. kiwi-re@kiwi-re.com
~Ramy
and my project is on the way once agien. So are you saying that i have to use the s5/s4 bell housing? as in Trans/adapter/bell housing, or i just use the adapter on the w58 bell housing and bolt it to the 13b?
~Ramy
#15
Lives on the Forum
Thread
Thread Starter
Forum
Replies
Last Post
MILOS7
3rd Generation Specific (1993-2002)
2
10-09-15 02:19 AM