stock injectors on streetport T2??
#1
stock injectors on streetport T2??
I just have to know for sure if the stock S5 T2 injectors are good enough for a streetport. i keep getting different answers from everyone i know. I guess it just depends on how big the port is. Im just wondering because my dad just built a streetport on my friends t2 but now it doesnt start on its own, unless its push started. Once its started it doesnt idle on its own either. it wont idle under 1500rpm. We have already checked everything more than twice. There are no vacuum or fuel leaks. The motor gets fuel and spark, we just cant figure out why we cant get the thing to start on its own. PLEASE HELP!!
#2
KM48 Burnout
iTrader: (4)
Join Date: Nov 2001
Location: Ventura County, CA
Posts: 1,692
Likes: 0
Received 0 Likes
on
0 Posts
You should rebalance your fuel injectors when you rebuild an engine.
I'd upgrade the secondary injectors to 1st gen GSLSE 680cc injectors, or upgrade to some other 720cc injectors and get the RTEK 1.7 from www.pocketlogger.com .
I'd upgrade the secondary injectors to 1st gen GSLSE 680cc injectors, or upgrade to some other 720cc injectors and get the RTEK 1.7 from www.pocketlogger.com .
#4
Rotary Enthusiast
Join Date: Sep 2002
Location: Statesboro, GA
Posts: 1,233
Likes: 0
Received 0 Likes
on
0 Posts
well, don't you think it's possible that you have to break the motor in to build compression up? it wouldn't hurt to wire up a fuel pump switch to make starting easier. and i have a streetported motor with intake and exhaust and run 15+psi all the time on stock injectors. been doing it for a long while now. i'm not saying it's ok to do that.
i have some 680's, will they fit the S4 harness plugs? cause i don't have the connectors for them.
i have some 680's, will they fit the S4 harness plugs? cause i don't have the connectors for them.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Megasquirt timing map and EGt ?? what do you guys think
immanuel__7
Megasquirt Forum
3
08-22-15 09:34 PM
armans
3rd Generation Specific (1993-2002)
5
08-15-15 09:08 PM