General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

steering rack

Thread Tools
 
Search this Thread
 
Old Dec 16, 2015 | 08:57 PM
  #1  
atl1234's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2015
Posts: 25
Likes: 0
From: atlanta
steering rack

how difficult is it to find the hard lines that run on the steering rack?
Reply
Old Dec 17, 2015 | 11:36 PM
  #2  
GrossPolluter's Avatar
Rotary Enthusiast
iTrader: (1)
 
Joined: Feb 2012
Posts: 1,075
Likes: 2
From: CA
I never tried looking, but from my experience with many different cars, they come with the rack. You could custom make them, but I would think someone in the classified has a bad rack that might ship them to you. You can try asking the mazda dealer, but I highly doubt those parts are sold seperatly
Reply
Old Dec 17, 2015 | 11:42 PM
  #3  
atl1234's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2015
Posts: 25
Likes: 0
From: atlanta
the previous owner removed the power steering pump and lines, so i have the trouble of tracking down this two lines, i would make my own but i don't know the thread pitch, so it might be easier if i can find someone who has a bad rack that has the lines to sell.(like you said)
Reply
Old Dec 17, 2015 | 11:43 PM
  #4  
atl1234's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2015
Posts: 25
Likes: 0
From: atlanta


this is what I'm talking about. sorry, only photo i could find and circle the lines I'm talking about.
Reply
Old Dec 18, 2015 | 12:27 AM
  #5  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Those lines have special ends which I found out when I had to replace them on my Project.
They have a flare but also a small O ring at the end of the line.
SO..a couple suggestions.
1: make the rack a depowered rack.
2 buy a Rack from Rockauto.
3 buy another rack
4 but a crappy rack with those lines and use the lines..
Reply
Old Dec 18, 2015 | 08:56 AM
  #6  
GrossPolluter's Avatar
Rotary Enthusiast
iTrader: (1)
 
Joined: Feb 2012
Posts: 1,075
Likes: 2
From: CA
Originally Posted by atl1234
the previous owner removed the power steering pump and lines, so i have the trouble of tracking down this two lines, i would make my own but i don't know the thread pitch, so it might be easier if i can find someone who has a bad rack that has the lines to sell.(like you said)
I cant tell from the picture, plus I don't own a fd. If they are power steering lines that go to the pump or reservoir , those can be purchased from a parts store. With the age of the cars, new ones wouldn't be bad. If not , like I said in the last post, forum member or dealer
Reply
Old Dec 18, 2015 | 04:57 PM
  #7  
atl1234's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2015
Posts: 25
Likes: 0
From: atlanta
Originally Posted by GrossPolluter
I cant tell from the picture, plus I don't own a fd. If they are power steering lines that go to the pump or reservoir , those can be purchased from a parts store. With the age of the cars, new ones wouldn't be bad. If not , like I said in the last post, forum member or dealer
its not the lines that go to the pump or the res.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx7b13
2nd Generation Specific (1986-1992)
10
Jan 3, 2016 11:52 AM




All times are GMT -5. The time now is 02:01 PM.