Starter shorted
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Nov 2010
Location: United states
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Starter shorted
Alright soo today i was trying to get my oil pressure wire connected and when i go to start the car the starter just clicks.. click, and then starts soo i jacked the car back up to check everything, and i unhooked the power side with the (Nut) and i totally forgot to unplug the batter.. long story short it touched the housing and sparks flew..
Now even with the key on no power, no nothing happens the car is completely dead.. Now im just wondering if this could have fried my pcm?? i have a 90 S5 N/A any input is appreciated.
Now even with the key on no power, no nothing happens the car is completely dead.. Now im just wondering if this could have fried my pcm?? i have a 90 S5 N/A any input is appreciated.
#2
Full Member
Thread Starter
iTrader: (1)
Join Date: Nov 2010
Location: United states
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Ok so power is back on.. somehow the batter positive terminal was loose.. now the starter no longer clicks or enganges.. gonna pull it out to check to see if it works.. maybe it got fried.
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
check the 100 amp fuse in the engine bay..hell check all fuses there,,and also the 15 amp engine fuse in the Driver's side Under the dash.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM