General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

single turbo swap questions

Thread Tools
 
Search this Thread
 
Old Jun 15, 2015 | 12:42 AM
  #1  
sherff's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Apr 2014
Posts: 79
Likes: 3
From: Fort McMurray AB
single turbo swap questions

Ok, basically I'm going single turbo and wondering what i can get rid of.
I am nearing the end of my build and so far i have gotten rid of my air pump, ACV, and a bunch of the solenoids, i am makeing this thread and hopeing to leave it open incase i need to ask future questions.

first question is do I need the purge control solenoid? i ask because i just stuck my harness back in the car after cleaning it up a bit and repinned it out and found that i had left that one in there, and i am wondering do i still need that with the single turbo and my aftermarket fuel rails.

second question is more a statement, i fucked up with my water temp probe plug and the wire pulled out the back of the harness side of it and wont stay in now when i try pushing it in, any ideas as to where i could get a new plug for it that would work?

for thirds a bit of a noob question, how many plugs should be plugged into my transmission, i forget how many i pulled out, but i could only find one plug out of like 4 to plug back in on the transmission part of the harness, i am thinking that the other plugs are for a auto or something
Reply
Old Jun 24, 2015 | 11:42 PM
  #2  
armans's Avatar
Senior Member
Tenured Member: 10 Years
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Oct 2014
Posts: 502
Likes: 38
From: America's finest city
I'd ask in the "Single Turbo RX-7s" thread instead
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM




All times are GMT -5. The time now is 01:12 PM.