RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   single turbo swap questions (https://www.rx7club.com/general-rotary-tech-support-11/single-turbo-swap-questions-1085111/)

sherff 06-15-15 12:42 AM

single turbo swap questions
 
Ok, basically I'm going single turbo and wondering what i can get rid of.
I am nearing the end of my build and so far i have gotten rid of my air pump, ACV, and a bunch of the solenoids, i am makeing this thread and hopeing to leave it open incase i need to ask future questions.

first question is do I need the purge control solenoid? i ask because i just stuck my harness back in the car after cleaning it up a bit and repinned it out and found that i had left that one in there, and i am wondering do i still need that with the single turbo and my aftermarket fuel rails.

second question is more a statement, i fucked up with my water temp probe plug and the wire pulled out the back of the harness side of it and wont stay in now when i try pushing it in, any ideas as to where i could get a new plug for it that would work?

for thirds a bit of a noob question, how many plugs should be plugged into my transmission, i forget how many i pulled out, but i could only find one plug out of like 4 to plug back in on the transmission part of the harness, i am thinking that the other plugs are for a auto or something

armans 06-24-15 11:42 PM

I'd ask in the "Single Turbo RX-7s" thread instead


All times are GMT -5. The time now is 12:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands