General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

S5 Vacuum line goes where?

Thread Tools
 
Search this Thread
 
Old Jan 28, 2014 | 10:26 PM
  #1  
draconis's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2011
Posts: 24
Likes: 0
From: Tacoma
S5 Vacuum line goes where?

After putting my S5 together, I find that I do not know where this vacuum line goes. It is a hard line that is connected to the charcoal canister via a soft line. I know this is also on the S4 but in the diagrams I've seen, where it connects on an S4 it doesnt connect in the same place as the S5. Or at least not that I can tell when looking at my engine compartment.

Any suggestions or pics would be very helpful as well.

Name:  WP_20140127_003_zps76816cf6.jpg
Views: 44
Size:  42.2 KB
Reply
Old Jan 29, 2014 | 10:25 AM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
I know on an S4 it goes to the PCV valve under the upper manifold area by the oil filler area.
It's a black plastic roundish bell type looking thing.
Maybe on an s5 it goes there too?
I see you checked.maybe you don't have one on the engine or someone removed it?
Reply
Old Jan 30, 2014 | 06:37 PM
  #3  
carbwiz's Avatar
Full Member
iTrader: (1)
 
Joined: Nov 2011
Posts: 40
Likes: 0
From: Jacksonville, Florida
to the oil fill tube, near the bottom
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM
Frisky Arab
2nd Generation Specific (1986-1992)
5
Sep 4, 2015 06:17 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
Sep 3, 2015 07:10 PM




All times are GMT -5. The time now is 03:45 PM.