S4 TII wiring harness HELP
#1
S4 TII wiring harness HELP
Hey guys, im now putting a S4 (87) TII wiring harness onto my S5 Jspec motor. Everything is fine except on the USDM S4 harness it has what looks to be 6 injector clips? I have also swapped the S5 injectors with 87 low imp. injectors, Im just curiouse how I am supposed to run these and where the other clips go.
This is my first s5 into s4 swap and I just want to do it right. I can shoot up pics tommorow of whats going on. Thanks alot guys any help is greatly appreciated.
Thanks alot, Kurt
This is my first s5 into s4 swap and I just want to do it right. I can shoot up pics tommorow of whats going on. Thanks alot guys any help is greatly appreciated.
Thanks alot, Kurt
#2
rotorhead
iTrader: (3)
the water thermosensor looks like an injector clip, and I think there's one other emissions or turbo related connector (twin scroll or something) that has the same style connector. On the 87 harness though the injector clips are tan colored and are on their own "sub branch" of the harness, front ones together and rear ones together. They also have the little locking tab thing in the center on the 87's. Then the thermosensor connector is green, or at least it was at one time, and the locking tab is offset. That other fuel injector looking connector is blue I think.
Are you blocking off the s5 OMP?
Are you blocking off the s5 OMP?
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM