rebuild kits
#2
Full Member
Join Date: Mar 2001
Location: Yorkton, SK, Canada
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
If you didn't blow an apex seal, just engine is worn/wearing out like low comp. etc, you can get by with a "gasket and seal kit" and new apex seals.
The gasket/seal kit complete for you car sells for about $110 at www.atkinsrotary.com and for $140 at www.mazdatrix.com.
Apex seal prices will vary, but usually about $35-40 each... and you need 6.
It's more stuff to get though if you have blown the engine
The gasket/seal kit complete for you car sells for about $110 at www.atkinsrotary.com and for $140 at www.mazdatrix.com.
Apex seal prices will vary, but usually about $35-40 each... and you need 6.
It's more stuff to get though if you have blown the engine
#4
Full Member
Join Date: Mar 2001
Location: Yorkton, SK, Canada
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
It varies a lot. Lots of shops will actually install a different rebuilt engine and take yours to keep. That way it's less time for the customers car in the shop when they can just take the engine out, and put a rebuilt one in. Prices really vary, especially with region and quality. In Canada here, there are not many shops, but they are inexpensive and you can get a quality rebuilt engine for about $1500-$2000 CDN ($1000-$1350 USD).
Check out rotary engine sites, it really varies. Search for "rebuilt rx-7 engine" or something. Here are a few:
http://www.mazdatrix.com
http://www.rotaryengine.com
http://members-http-4.rwc1.sfba.home...ec/pageone.htm
http://www.atkinsrotary.com
http://www.rx7.com
That is just a few off hand, there are many. Probably expect it to cost in the range of $1200-$2200 USD.
Check out rotary engine sites, it really varies. Search for "rebuilt rx-7 engine" or something. Here are a few:
http://www.mazdatrix.com
http://www.rotaryengine.com
http://members-http-4.rwc1.sfba.home...ec/pageone.htm
http://www.atkinsrotary.com
http://www.rx7.com
That is just a few off hand, there are many. Probably expect it to cost in the range of $1200-$2200 USD.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
10-09-15 10:05 PM