General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

primary injector failure symptoms?

Thread Tools
 
Search this Thread
 
Old Apr 29, 2002 | 01:46 AM
  #1  
A-Spec's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 418
Likes: 0
From: West Covina, CA, USA
primary injector failure symptoms?

This is on a 3rd gen w/stock turbo, injector, fuel pump. Right now my engine runs rough on idle and low power/stumbling in the low rpms 0-2000rpm. But as it gets pass 2500 it gets really smooth and accelerates like crazy. You can hear the difference in the exhaust tone. Do you think this shows a bad primary injector? because from my understanding the primary injectors are on during the low rpms and the secondaries come on around 2000rpm? correct me if I'm wrong...

tks in advance
David
Reply
Old Apr 29, 2002 | 08:59 PM
  #2  
P'cola FD's Avatar
Hamado things my way!
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 1,245
Likes: 0
From: Pensacola, Florida
First, check your compression. Once you find out whether it is good or bad you can go from there. If it's good then it could be your injector. I had a similar problem where the primary injector electrical connector came off and it sounded like it only had one rotor, ran horribly and had no power. The power didn't even pretend to come on until 3,500 rpm though. Do a search for a post by me with $100 to whoever can fix my problem in it.
Reply
Old Apr 29, 2002 | 09:13 PM
  #3  
tangkai127's Avatar
Newbie
 
Joined: Dec 2001
Posts: 3
Likes: 0
From: Goleta
David, just get the new injector from P and we can go drifitn again...
Reply
Old Apr 30, 2002 | 11:23 PM
  #4  
A-Spec's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 418
Likes: 0
From: West Covina, CA, USA
yeah compression is fine....I'll have to take it apart to check if the connector came off on mine.

does the secondary 850cc injector fit in the primary??

David
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
connerfd3s
New Member RX-7 Technical
11
Sep 19, 2015 05:58 PM
Donald Hampton
2nd Generation Specific (1986-1992)
5
Sep 17, 2015 03:13 PM
localized
New Member RX-7 Technical
3
Sep 16, 2015 12:18 AM




All times are GMT -5. The time now is 05:06 PM.